A LEADING AUTOMOTIVE ABS PUMPS REPAIR

Mercedes Sensotronic brake-by-wire SBC ABS Pump System Failures

20 Feb, 11

Mercedes Sensotronic brake-by-wire SBC ABS Pump System Failures

Contact Us

Mercedes Sensotronic Brake Control (SBC) ABS PumpSensotronic Brake Control (SBC) ABS pump systems are commonly found on higher end Mercedes such as the E-Class, SL & CL Class, CLS etc.. the SBC Sensotronic ABS pump is a brake-by-wire system and Mercedes Benz were one of the first vehicle manufacturing companies to apply this system to cars.

How It Works
The Brake-By-Wire Sensotronic Brake Control (SBC) system is quite different to the conventional hydraulic abs braking system because it doesn’t have a brake servo at the reservoir to start with and the brake pedal is connected to the ECU by wire. The sensors on the brake pedal offer a way of communication, telling the on-board computer how the brake pedal was pressed, how hard it was pressed & how quickly it was pressed etc. The computer then calculates the required pressure and activates the braking system producing braking force at each wheel via modulators.

The problem with Sensotronic Brake Control (SBC) ABS Pump Braking Systems
The Sensotronic Brake Control (SBC) ABS Pump has a service life (also known as a life expectancy) programmed into the control module which works off the number of brake actuations. Once this limit has been reached, the Sensotronic Brake Control (SBC) light may illuminate on the dash or a brake related warning may appear on the trip computer. Once this happens, the Sensotronic Brake Control (SBC) system is de-activated and the hydraulic braking function mode is activated whereby limited braking pressure is applied to the front brakes thus increasing the braking distance.

When the Sensotronic Brake Control (SBC) ABS pump fails, you are led to believe that the unit will require replacing and in some cases (depending on the vehicle application) it can cost up to £2500-3000 for a replacement unit (+Labour, Programming & VAT).

Connected to the STAR diagnostic system, the fault code C2498 will show the fault code description “Service Threshold Reached” as a current & stored fault code. This code cannot be erased without replacing the system.

Common Part Numbers:

Mercedes Part Number – 005 431 0012
Mercedes Part Number – 005 431 0612
Mercedes Part Number –  005 431 3412
Mercedes Part Number –  005 431 7112

Bosch Part Number – 0265 250 067
Bosch Part Number – 0265 250 065
Bosch Part Number – 0265 250 077
Bosch Part Number – 0265 250 092
Bosch Part Number – 0265 960 025
Bosch Part Number – 0265 960 012
Bosch Part NUmber – 0265 960 019

How Can Sinspeed Help Reduce This Cost & Fix The Problem?
Rather than replacing the unit with an expensive new part or even replacing with a second hand part (just waiting for it to fail).. we can remanufacture your existing unit and reprogram the Sensotronic Brake Control (SBC) control module to increase the service life expectancy of the unit. This is becoming a very common problem and we’re able to carry out full repairs to these units and offer a very competitive fitting rate.

For more information & a quote, call us today on 0871 2887 666.

Tags : 0265960019, ABS Repairs - Call 0871 2887 666 Today, C2498 Service Threshold Reached - Repair Options, Fault Code: C2498 Repair Options, Mercedes ABS Repairs, Mercedes ABS/SBC Fault Code: C249F Service Threshold Reached, Mercedes SBC ABS Life Expectancy Fault, Mercedes SBC Repairs - Call Sinspeed On 0871 2887 666 Today, Repaired SBC ABS Pumps In Stock, SBC ABS Pump 005 431 0012, SBC ABS Pump 005 431 0612, SBC ABS Pump 005 431 3412, SBC ABS Pump 005 431 7112, SBC ABS Pump 0265 250 065, SBC ABS Pump 0265 250 067, SBC ABS Pump 0265 250 077, SBC ABS Pump 0265 250 092, SBC ABS Pump 0265 960 025, SBC ABS Repairs, SBC ABS Repairs - Call 0871 2887 666 Today, SBC Repairs, Sensotronic Brake Control (SBC) Repairs.
142 thoughts on “Mercedes Sensotronic brake-by-wire SBC ABS Pump System Failures
    • Hi Fawzi,

      Even with STAR diagnostics, if you have the SBC Life expectancy threshold fault then you will not be able to resolve this issue with just a STAR machine. You will have to replace the unit for a new unit or send us the old unit for reconditioning. Please send us an email or call us for pricing and more information.

      Regards,
      Sinspeed Ltd

  • Hi,

    I have an ML500 2002 model. This car started to have the ABS/ETS lights come on the dashboard (sometimes only) and reading your feature above (which is very helpful) I am wondering if my problem is actually the ABS Pump.
    The brakes perform as they should before the lights come on and even if they don’t come on so my stopping power hasn’t reduced at all.
    Do you guys think there could be an electrical connection or sensor problem arising from the brake pedal, which might be the real problem and not the pump.

    Cheers

    • Hi Graham

      Common problem on this vehicle is the wheel sensors and the steering angle sensor, more common than the ABS ecu itself.

      Please call our office for details on 0871 2887 666 or alternatively if you send us a email, we will get straight back to you.

      Best Regards
      Support Team
      Sinspeed Ltd

  • I’ve got a E270cdi 2002 and just got the white malfunction warning on my dash “service brake visit workshop” and am about to find out through MB tomorrow what state the SBC pump is in, ie if they need to replace or can reprogramme it. I’ve only just come across your website and read about what you can do.
    Are you able to give an idea of cost and time involved as I use my car for airport transfers and cant be without it!
    Cheers

    • Hi Tony

      Thank you for your enquiry,

      We don’t actually list prices on our website but if you could kindly send us an email or call our offices on 0844 847 9999, a member of our team will be happy to assist you further.

      Kindest Regards

      Jason
      Support Team
      SINSPEED LTD

  • hi ,
    I have a mercedes w211 02 model 270cdi. The SBC unit needs to be reconditioned. The part number is 0084319812.

    Can you reccondition the unit and what is the cost?

    Kind regards

    Ian

    • Hi Ian

      We can work with these units and offer a Lifetime warranty. For pricing and more information, please contact our offices on 0844 847 9999 or send us an email.

      Kindest Regards

      Jason
      Support Team
      SINSPEED LTD

  • Dear Sir,

    I have the W211 in Kenya and have the SBC problem on it. Would it be cheaper for me to bring it to the uk than getting a new one and on a previous post you said you can give a life time warranty on it, is this correct.

    • Hi Stephen

      Thank you for your enquiry,

      Yes we can remanufacture these units for a fraction of the cost of a new unit and no programming will be required when fitting the unit back to the vehicle. We are offering all remanufactured SBC pumps with our Lifetime warranty. For pricing and more information, please email our support team.

      Kindest Regards

      Jason
      Support Team
      SINSPEED LTD

    • Hi Lukas

      Thank you for your enquiry,

      We do carry out the repairs to reprogram this unit and reset the Service Life Expectancy / Service Threshold fault, for pricing please call us on 0844 847 9999 or alternatively please email us via the contact form.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • Good evening,
    I have a2005 e211 e200, Reg No M50JHN and I have the visit workshop service brake message.
    Can you give me a cost and turnaround time to recondition my SBC pump please?

    Many thanks

    John

    • Hi John

      We can repair these units but do not list prices on our website. For a quotation, please call our offices on 0844 847 9999 or alternatively please send us an email.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • I have a 2003 E270CDI it has just stopped because all red lights on dash showing, reduced braking power , do not drive car etc. an not get it out of park gear into any other gear. Do you do a complete fitting service or just recondition the pump and what are the costs,

    Many thanks Tony

    • Hi Tony

      Thank you for your enquiry,

      We offer two types of services for this particular fault and urge customers to bring the complete vehicle into our workshops for a faster turnaround and better success rate. We can work with the SBC units on the bench if you remove it from the vehicle and send by post but the success rate of repairing them in situe whilst fitted to the vehicle is much better. For more information and a quote, please email us or call on 0844 847 9999.

      Kind Regards

      Jason
      SINSPEED LTD

  • Hi
    I called yesterday to discuss the ‘dry squealling’ sound that the pump makes first thing.
    Is it on it’s way out ?
    Do you have a workshop in Basingstoke where it could be serviced ? ( we are in Winchester )
    As yet, no dash warnings. 170k miles 2003 320 cdi reg 871D
    Kind Regards
    David

    • Hi David

      Thank you for your enquiry,

      I would recommend the vehicle comes into our main workshop in London where we remanufacture the SBC Pumps. It sounds like the valves may be on the way out but if that is the case, it can not be repaired. All we can do is flush the fluid through with clean fluid and re-bleed to see if that helps solve the problem. Once the valves are damaged, you must replace the SBC Pump.

      Kind Regards

      SINSPEED

  • Hi, my sbc pump has displayed a white warning light on dash. If I get the pump reset , how long can i typically expect from pump before i could get a red waring light, ie what is the expected lifespan. I have an eclass 04, 130k miles.

    • Hi Brian

      Thank you for your enquiry,

      We can reset the life expectancy of the pump to how it would have been from factory. So if it’s lasted 10 years then it would last another 10 years before it flags up again. Our SBC Pump reset service comes with a Lifetime warranty so if you have it reset by us once, we will reset it again if needed in future.

      Kind Regards

      Jason
      SINSPEED

  • I own an 03 E270 CDI with 90K miles and I have just got the “Service Brake Visit Workshop” message come up. I am informed that the SBC pump is showing “end of life” but i understand this unit can be reprogrammed and the life extended. Can you do this, does the unit need to be taken off the car and how long does it take? How much does it cost?

    Regards
    Mark

    • Hi Mark

      Thanks for the enquiry,

      We can definitely help with this and have a few options depending on a few factors as follows:

      1. 10-Digit Bosch part number starting with 0265, located on the unit on a yellow sticker.
      2. Are the brakes still functioning?
      3. What colour is the warning light? (White / Yellow / Orange / Red)
      4. List all the fault codes you are getting on the diagnostic report.

      With the above information we can quote exactly how much it would cost to rectify and we can carry out most repairs with the unit on the vehicle.

      Kind Regards

      Jason
      SINSPEED

    • Hello

      Thanks for your enquiry,

      We’ve got brand new genuine parts and also reconditioned SBC units in stock. We can possibly also repair your own unit. Please call or send us an email with further information. We will need the 10 digit bosch number from your SBC unit, the fault codes relating to the SBC faults and whether the vehicle is still drivable or if the brakes have failed completely.

      Kind Regards

      Jason
      SINSPEED

  • The car has a warning light” reduced braking power” what could the problem? Car is locked in park it’s an automatic car

    • Hi Chosen

      You will need to get the SBC fault diagnosed. We do offer diagnostic services if your local garage is not equipped with the adequate equipment to diagnose this fault.

      Kind Regards

      Jason
      SINSPEED

    • Hello

      Thanks for the enquiry,

      We can repair this SBC Pump with that particular part number not a problem but we do need to know which fault you’re having first. I have sent you an email requesting further information so that I can quote you accurately.

      Kind Regards

      Jason
      SINSPEED

  • I HAVE SAME PROBLEM WITH MY MERC 03,,SHOWS RED LIGHT STOP.VISIT WORKSHOP,,I HAVE TRIED TO RESET IT BUT THE WARNING LIGHT COMES BACK AGAIN,,PLEASE SEND ME AN EMAL ABOUT THE PRICE OF THE REPAIR,,THANX

  • I have Sl 500 on 02 plate and stop brake visit work shop light comes up in red my brake pedal then goes to the floor but then when left for a while I have brakes but the sbc pump makes a noise every time I pump the brake pedal . So can you advise thanks ….. Tony

  • hi i have w211 e class the sbc fault says visit work shop but not in red u can fixed the sbc and how much cost plus shipping I’m from MALTA eu.

    kind regards
    neville

    • Hello Neville

      Thank you for your enquiry,

      We’ve sent you an email requesting further information. Please respond so that we can quote you accordingly.

      Kind Regards

      Jason
      SINSPEED

  • my w211 had code C249f sbc and that was resetting and now sbc hold and sbc stop defective visit workshop no codes on sbc can you repair and how mutch send me a email .Thanks

    • Hello Peter

      Thanks for the enquiry,

      We’ve sent you a quick email requiring more information before we can quote you.

      Kind Regards

      Jason
      SINSPEED

  • I have a 2003 E320 W211 with 93K miles. Recently, I got the white malfunction warning on my dash board “service brake visit workshop”. Mechanic checked with his tools and got a code C249f. Can you refurbish this unit and what is the cost for refurbishing this SBC pump. Thanks

    • Hi Krishna

      Thanks for the enquiry,

      We have sent you an email with full pricing & information.

      Kind Regards

      Jason
      SINSPEED

  • Hi I have a Nov. 03 E270 CDI its showing brake defective visit workshop, white colour, kindly advice best way to go by fixing this problem. is the car safe to drive? I mean to the workshop. what would be repair or replace cost. lastly if I wish to go ahead with you guys what will be my next move. Bola

    • Hi Bola

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hello Mindaugas,

      Thank you for your enquiry,

      I have sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • I have a E-320 CDI with 90.000 miles and its showing “brakes defective visit the workshop” I live in Miami and want to know the price and the warranty you give to remanufacture the sbc.
    The BOSH 10 number is 0265960029
    The brakes are still working normaly
    The warning ligth is white
    The code I need to ask my Mechanic

    • Hello Sergio,

      Thank you for your enquiry,

      I have sent over an email with pricing and information regarding a Mercedes SBC Pump Repair.

      Kind Regards,

      Jason
      Sinspeed

  • HI,I got E 320 (2003 ) SBC red error on dash, diag come up C249f ,C25D6, C2131,
    Please let me know the problem and solution,parts + flight to Sydney Australia if need

    • Hello Andy,

      Thank you for your enquiry.

      I have sent over an email for further information regarding your Mercedes SBC Pump repair.

      Kind Regards

      Jason
      Sinspeed

  • Hi,

    I have had the SBC Code reset , however there is a buzzing noise with slight vibration near the break Pedal. Is this something you can reduce/eliminate.

    Also, Can i bring my vehicle to you for replacement , or remove the SBC unit myself and bring it to you for repairs.

    • Hello Viondi,

      Thank you for your enquiry, and many apologies for the delay in our response.

      I have sent over an email for further information regarding the repair of your SBC Pump.

      Kind Regards

      Jason
      Sinspeed

    • Hello Tahir,

      Thank you for your enquiry,

      I have sent over an email for further information regarding an SBC Pump on your Mercedes.

      Kind Regards

      Jason
      Sinspeed

  • I have a Mercedes E class, 2003 with ‘Service Break- Visit Workshop’ showing on dash, can you give me an idea of what it might cost to have the SBC unit reconditioned and what is the turn around time, ie from I send it to you until I get it back, also can the unit be taken off and replaced by local mechanic, looking forward to your reply, regards, tom.

    • Hello Tom,

      Thank you for your enquiry,

      I have sent over an email for further information regarding the repair of your SBC unit on your Mercedes.

      Kind Regards

      Jason
      Sinspeed

  • I have a 2004 E class that is coming up with a brake error and it seems that it needs the SBC sorting out. How much to repair or replace?
    Many thanks

    • Hello Paul,

      Thank you for your enquiry,

      I have sent over an email for further information regarding the repair of your SBC unit on your Mercedes.

      Kind Regards

      Jason
      Sinspeed

  • Hi I have a e270cdi 2002 with s.b.c failure in red,how much is it do do it up,or how much is a recondition one thanks

    • Hello Dominic,

      Thank you for your enquiry,

      I have sent over an email for further information regarding the repair of your SBC unit on your Mercedes.

      Kind Regards

      Jason
      Sinspeed

  • Hi Guys,

    I have a 2005 E 320. VIN: WDBUF65J75******* . The SBC has de-activated and the hydraulic brake function is on. What will it cost for you guys to re-build my SBC unit?

    Thanks,
    Mike

    • Hello Mike,

      Thank you for your enquiry,

      I have sent over an email with pricing and further information regarding the Repair of SBC Pump on your Mercedes.

      Kind Regards

      Jason
      Sinspeed

  • Am having a warning light service brake visit workshop in white.and somehow it shows in red today stop the vehicle.how much wil it cost to repair sbc pls.

    • Hello Ola,

      Thank you for your enquiry,

      I have sent over an email for some further information regarding your Mercedes SBC Pump Repair.

      Kind Regards,

      Jason
      Sinspeed

    • Thanks for your reply. I stil drive the car but sometimes it come up red warning light saying stop the car break defective my local mechanic change the break pad .he said the abs need attention. Obviously I can here some strange noice when I open the car door from d pump.I wil appreciate any help or if u can take the car tour nearest workshop in my area as I live in se16 3da. Thanks

      • Hello Ola,

        Thank you for your enquiry,

        An email has been sent to you with pricing and further information regarding your Mercedes SBC Pump Repair.

        Kind Regards,

        Jason
        Sinspeed

    • Hello Tereaza,

      Thank you for your enquiry,

      I have sent over an email with pricing as well as further information regarding the SBC Pump Repair on your Mercedes.

      Kind Regards,

      Jason
      Sinspeed

  • Hi
    for the first time my dash is reading “Service Brake!” – “Visit Workshop” I have full Mercedes Service History till March 2016 and this unit was serviced last year, Mercedes want to replaces the unit I said it should not need a New Unit. What do think. can you remove this reading. many thanks. Colin

    • Hello Colin,

      Thank you for your enquiry,

      I have just sent over an email now for further information regarding the SBC Pump for your Mercedes.

      Kind Regards,

      Jason
      Sinspeed

  • E200 Merc
    White warning light showing visit workshop
    Two codes showing
    1. stoplight switch
    2.operating time exceeded
    No obvious braking problems
    any suggestions ?

    • Hello Mr Howard,

      Thank you for your enquiry,

      I have just sent over an email now for further information regarding the repair of the SBC pump on your Mercedes.

      Kind Regards,

      Jason
      Sinspeed

  • I have a E500 06 mercedes with the white area code brakes problem visit work shop.I took the car to the shop and the code read low pressure. the brakes is fine and stop the same. what is the price off cleaning and resetting the clock on the SBC pump?

    • Hello Estrice,

      Thank you for your enquiry,

      I have just sent over an email now with pricing and further information regarding the repair of the SBC pump on your Mercedes E500.

      Kind Regards,

      Jason
      Sinspeed

  • Hi. I have a 2005 E320 W211 with Bosch 0 265 960 023 SBC unit. It is showing the white error message ‘Service Brake Visit workshop’
    Unfortunately I live in Canada where no such service as yours can be found. I have a friend coming to the UK in the new year. If I were to have him bring the SBC unit to you, how long would it take to reset and what would the charge be? Where in the UK are you located?

    • Hello Michael,

      Thank you for your enquiry,

      I have just sent over an email now for further information regarding the repair of Merccedes SBC Pump.

      Kind Regards,

      Jason
      Sinspeed

  • Hi there,
    Could you please give me an approximate cost to reset SBC unit (abs pump)
    on 2003 Mercedes E320 (W211) (usual problem)
    Many thanks
    Ian

    • Hello Ian,

      Thank you for your enquiry,

      I have just sent over an email now with pricing and further information regarding a SBC Pump for your Mercedes E320.

      Kind Regards,

      Jason
      Sinspeed

  • My merc. E220 cdi reg. no.J***** show white sign on dash visit work service brakes.
    It Got to do some thingh with aBS system. Please let know how long it will take and price.

    Thanks.

    • Hi J,

      Thanks for the enquiry,

      I’ve just sent over an email now for some further information regarding an SBC Pump for your Mercedes SBC Unit.

      Kind Regards

      Jason
      SINSPEED

    • Hello Mukesh,

      Thanks for the enquiry,

      This is known to be a very common issue and we have sent over an email now with pricing and information. Please do not hesitate to get back to us if we can be of further assistance.

      Kind Regards

      Jason
      SINSPEED

  • hallo my sbc pum on my mercedes e 270 cdi come to red on dashboard. i been told i need new one but it cost 1800 pound in mb garage. can you remanufacture mine old one or can you suplie me new pump for any better price? or if i send you old one can you fix it and send me back?

    my pump is A005 431 05 12 Q6
    bosch no, 0 265 250 065

    thanks

    • Hello Miroslav,

      Thank you for your enquiry,

      I have sent over an email now for some further information regarding the repair of your SBC pump.

      Kind Regards,

      Jason
      Sinspeed

  • mercedes e220 w211 cdi avantguard w211 keeping getting Red sBC light on intermittently can you please advise me.a.s.a.p thks

    • Hello Tailor,

      Thank you for your enquiry,

      I have sent over an email now for further information regarding the repair of your Mercedes SBC Pump.

      Kind Regards,

      Jason
      Sinspeed

  • Hello, my sbc pump went red on dashboard “reduced breaking effor” and “stop car immediately” could you send me some further information regarding the repair of sbc pump. W211 e220cdi 2003y

    • Hello Andrew,

      Thank you for your enquiry,

      I have sent over an email now for further information regarding the repair of your Mercedes SBC Pump.

      Kind Regards,

      Jason
      Sinspeed

    • Hi Azad

      We need a little more information about your SBC unit, whether the brakes currently work and what faults you’re getting on the diagnostics. I have sent you a quick requesting further information. If you can come back to me on the email I can then quote accordingly for a repair or replacement unit.

      Kind Regards

      Jason
      SINSPEED

  • I have a 2003 E Class W211 with 112,000 miles. The white sign “service brake visit workshop has appeared. Whats the repair and approx cost to fix this?

    • Hi Alex

      Thanks for the enquiry,

      We’ve sent you an email requesting a bit more information. If you can kindly respond to our email we can quote accordingly.

      Kind Regards

      Jason
      SINSPEED

  • Hi,
    2003 E-Class Wagon, S211 270 CDI with ESP/ABS/SBC malfunctions diagnosed as pump electronic unit failure.
    All sensors and reluctor rings replaced. Car has 132k mls.
    Any idea of cost to exchange/repair?

    Kind regards,

    Greg R

    • Hi Greg

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Sarfaraz

      Thanks for the enquiry,

      We would need a little more information to confirm whether or not your unit would be repairable. Majority of the times it is repairable even when others tell you it is not. We have sent you an email, please respond with the required information and we can quote accordingly.

      Kind Regards

      Jason
      SINSPEED

  • 06 e500 mercedes pump #0265 960 025 white light on dash visit workshop what will it cost to rebuild unit? bought a used one ,it has same problems.

    • Hi Estrice

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • HI there i have a 2003 E Class W211 with 93,000 miles. The white sign “service brake visit workshop has appeared, the car still breaks as usual and the SBC H works as normal. Whats the repair and approx cost to fix this?

    • Hi Maz

      Thanks for the enquiry,

      We’ve sent you an email with pricing and information for the repair and replacement of your SBC unit.

      Kind Regards

      Jason
      SINSPEED

  • Hi i have e320 cdi 2003 and i get white service brake visit workshop. How much would it be to recon the unit and how long does it take ?

    • Hi Lukas

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Rasha

      Thanks for the enquiry,

      We’ve sent you an email, if you could kindly respond with a bit more information as requested in the email, we can then determine whether it will be repairable or a replacement.

      Kind Regards

      Jason
      SINSPEED

    • Hi Jacob

      Thanks for the enquiry,

      We do ship to Africa and have sent you an email with pricing and information.

      Kind Regards

      Jason
      BODYTEQ

  • mERCEDES E CLASS E32O DIESEL (2004)

    sign on dash In RED visit workShop brakes Fluid .
    But check the fluid it was fine plus had a full service.

    • Hi Mehmet

      Thanks for the enquiry,

      We’ve sent you an email with some information and pricing.

      Kind Regards

      Jason
      SINSPEED

  • Hi.have problems with my 03 plate w211.its showing ESP not found and sometime s its saying wisit workshop.been in garage and mechanics told i need new abs pump.can you fix old one?

    • Hi Ged

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information including our offer for brand new genuine replacement units with a Lifetime warranty, direct from Bosch in Germany.

      Kind Regards

      Jason
      SINSPEED

  • Hi , car is 53 reg w211 e220cdi i got white “Visitors workshop brake failure” and From 2 weeks sometimes red “stop abs failure” 2-3 times a day . Pump nimbers is 005 431 33 12 q1 and 0 265 250 075 . Can you send me a quote ? Thx

    • Hi Greg

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information including the costs for a brand new genuine replacement unit direct from Bosch in Germany with a Lifetime warranty.

      Kind Regards

      Jason
      SINSPEED

  • White sign on dash: BRAKE – Visit workshop (after research i am thinking accumulator on SBC unit)
    Reading From unit: 0 265 250 062 0 265 960 018 HW 05/03 SW15/03
    What is cost of re-manufacturing?
    Thanks.

    • Hi Vkejo,

      Thanks for the enquiry and many apologies for the delay in our response.

      We’ve sent you an email for some further information regarding the faults you are currently experiencing. If you could please respond to the email we will then be able to send you a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • hi
    my part number is A0084313812q2
    i have abs sbc problem atten to work shop
    how much would it cost to refurb this item? thank you

    • Hello Khuram,

      Thanks for the enquiry and many apologies for the delay in our response.

      We’ve sent you an email for some further information regarding the faults you are currently experiencing. If you could please respond to the email we will then be able to send you a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • I have E 240 model 2003 when normal driving some time coming message (RED) on dash board ( brake defective stop vehicle ) at this time reduce the speed , when i make switch of and restart message gone out but after few time coming again when I’m Inspection My Car In Workshop By Computer The Fault Cod It’s A7/3
    N47-5
    so i need your advise as soon as you ca

    • Hello Mudathir

      Thanks for the enquiry,

      We’ve sent you an email for further information regarding the SBC unit before quoting you. If you can please reply to the email, we will then be able to get back to you with a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • Hello.I have an E270 from 2093 with 198k miles.Following numerous warnings my car is now off the road while i decide what to do.
    Is this lukely to be a programming issue?
    What would you need to know from me to give some advice?
    Many thanks.
    Howard May.

    • Hello Howard

      Thanks for the enquiry,

      We’ve sent you an email for further information regarding the SBC unit before quoting you. If you can please reply to the email, we will then be able to get back to you with a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • Hello, I have E320 2oo4year 110000miles. when I was driving the car suddenly lost brake and on dashboard coming red message (brake defective stop vehicle). But on next day everything was fine but I’m afraid to drive again. SBC pump A0054310512Q6 0265250065.What could be the reason?

    • Hello Vadim,

      Thanks for the enquiry,

      We’ve sent you an email now with pricing and further information.

      Kind Regards

      Jason
      SINSPEED

  • Hi.
    Have a 04 e320cdi.
    With white waring brakeservice, stored fault code c235c.
    What would it cost to get my unit remanufactered?

    • Hello Stian,

      Thanks for the enquiry,

      We’ve sent you an email for further information regarding the SBC unit before quoting you. If you can please reply to the email, we will then be able to get back to you with a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

    • Hello Max,

      Thanks for your enquiry,

      We have sent over an email now for some further information regarding the fault you are experiencing, once you respond we will then be able to quote accordingly.

      Kind Regards

      Jason
      SINSPEED

  • have mercedes 320 2003..whit waring breakeservice .haw much is gone cost to get my unit remanufacture and haw long u need for that. Thanks

    • Hello Radu

      Thank you for your enquiry,

      We have sent over an email now for some further information regarding the problems you are experiencing with your Mercedes SBC pump. Once we have received a response we will then be able to quote you accordingly.

      Kind Regards

      Jason
      SINSPEED

    • Hello Radu,

      Thanks for the enquiry.

      We’ve sent over an email now for some further information. If you can reply to the email we will then be able to provide a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • Hi i have an e270cdi 2003 model, the dashboard has gone red with visit workshop, i’ve been told the its the eCU SBC pump, Bosch 0265 960 018 , ID0126033375, how much would it cost to get this repaired?

    thanks

    • Hello Khuram,

      Thanks for the enquiry,

      We’ve sent you an email for further information regarding the SBC unit before quoting you. If you can please reply to the email, we will then be able to get back to you with a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • Hello, what information do you require to be able to give me a quote on getting this resolved on my 2003 Mercedes E class?

    • Hello Carl,

      Thanks for the enquiry and many apologies for the delay in getting back to you.

      We’ve sent over an email now for some further information regarding the faults you are experiencing with your SBC unit. If you can please reply to the email, we will then be able to get back to you with a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • Hi there
    I think my sbc pump is on the way out, it played up today.
    Can you tell me how much it’ll cost for a Mercedes e240, 05 plate. Thanks.

    • Hello Raf,

      Thanks for the enquiry and many apologies for the delay in our response.

      We’ve sent over an email now for some further information. If you can reply to the email we will then be able to provide a more accurate quote.

      Kind Regards

      Jason
      SINSPEED

  • I have a 2004 320 E auto. The red warning on the dashboard only comes up when I press the brakes going downhill. this came up after the discs and pads were replaced at 87,000 km. sometimes on the flat when I go into a parking lot and wait for the ticket, the whole aBS system lights up and there is no brake pressure. I switch off the car, and everything clears. is he aBS Unit needs recalibrating and cleaning, or is it the sbs pump? I hear the SBS pump working all the time? I live in Hong Kong -= how much would it cost to exchange both pumps and the brake pedal switch ? Nick

    • Hi Nick

      Thanks for the enquiry,

      We’ve sent you an email with pricing to replace the SBC unit and the replacement will be a brand new genuine part with a Lifetime warranty.

      Kind Regards

      Jason
      SINSPEED

  • Hi,

    I have E320 2004 model.
    The break warning light came up while i was on journey but the light didn’t come up the next day.
    Everything seems fine now.

    What should I do?

    Regards,

    • Hi Samson

      Thanks for the enquiry,

      The SBC module would have hopefully stored a fault code in it’s historical memory. I would recommend taking the vehicle to a garage to have the fault codes read out, ideally with a STAR diagnostic system or equivalent. Equipped with the fault codes, finding and rectifying the fault will be a lot easier.

      Kind Regards

      Jason
      SINSPEED

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact