A LEADING AUTOMOTIVE ABS PUMPS REPAIR

Common ABS (ESP) Fault – Brake Pressure Sender / Sensor Switch Failure – Audi / Mazda / Mitsubishi / Seat / Skoda & Volkswagen

10 Aug, 10

Common ABS (ESP) Fault – Brake Pressure Sender / Sensor Switch Failure – Audi / Mazda / Mitsubishi / Seat / Skoda & Volkswagen

The Famous Brake Pressure Sensor ABS Fault

VW, Seat, Skoda and Audi Brake Pressure Sensor Switch ABS Fault The ABS Pump control module is a very common fault for owners of VW’s, Audi’s, Skoda’s & Seat’s but also all other makes including Mazda, Mitsubishi, Honda and BMW. All suffer with the common ESP system fault. The fault is detected by having the ESP light illuminated on the Dashboard Speedo and also the “ESP OFF” switch will be illuminated too. Pressing the “ESP OFF” switch will have no effect. If you’ve had this problem, you would have most likely taken the vehicle to your local garage where they’d plug it onto a diagnostics machine and find the following common fault code: “01435 Brake Pressure Sensor 1 (G201)” or it would have given you the following fault description: Brake Pressure Sensor or Brake Pressure Sender.

If you had your vehicle in with the main dealers then you would have been told that you need to replace the ABS Pump Control Module. In fact, almost any garage you go to will tell you the same thing. A replacement ABS unit for your vehicle would be in the regions of £1000 – £1500 (+Vat) and that’s not including Labour. Luckily for you, we can repair these units for a fraction of the cost and could potentially save you a lot of money. What’s more, we now offer a full LIFETIME warranty on the replacement / remanufactured parts giving you complete peace of mind.

Most Common Vehicles Affected

Audi A2
Audi A3
Audi A4
BMW 1 Series
BMW 3 Series
Citroen C2
Citroen C3
Ford Focus
Ford C-Max
Honda Accord
Honda CRV
Lexus IS200
Lexus IS300
Mazda 3
Mitsubishi Outlander
Opel Astra
Peugeot 1007
Peugeot 206
Peugeot 207
Renault Laguna II
Seat Leon
Seat Altea
Seat Toleda
Skoda Octavia
Suzuki Splash
Suzuki Swift
Suzuki Grand Vitara
Suzuki Vitara
Toyota Celica
Toyota Colorado
Toyota Land Cruiser
Toyota MR2
Toyota Rav4
Toyota Yaris
Vauxhall Astra
Volkswagen Golf
Volkswagen Bora
Volkswagen Passat
Volkswagen Tourag
Volkswagen Touran
Volvo C30
Volvo C70
Volvo S40
Volvo V50

What is ESP & Why Do I Need It?

Exchange Units Kept In Stock The ESP (Electronic Stability Program) is an additional function to the commonly known ABS (Anti-Lock Braking System) & TCS (Traction Control System). Many 2000+ VW’s, Audi’s, Skoda’s & Seat’s are fitted with the ESP system. ABS prevents the wheels locking up under harsh braking / emergency braking, TCS will prevent the wheels from spinning when accelerating hard. ESP is much more advanced and is constantly working, calculating every corner you take to ensure you’re safety. The ESP system will use accelerometer sensors around the vehicle, to detect when the vehicle is likely to loose traction whilst cornering or sudden turning to avoid a collision at speed. If there is excessive longitudinal or lateral acceleration/deceleration it will be detected & by sudden steering at speed, the ESP system will instantly apply the brake to one of the opposing wheels, preventing excessive lateral movement that causes loss of traction to the road and loss of driver control of the vehicle.

Why You Should Choose Sinspeed To Replace / Remanufacture Your ABS unit

The ABS pump will have failed due to a manufacturing defect and replacing it with a new unit or even a second hand one does not necessarily prevent this from happening again. In fact, if you was to replace it with a working second hand unit, then you will be waiting for the day for it to fail because they are all failing at one point or another. The problem is with the Internal Brake Pressure Sender Sensor Switch. Once this fails, the ESP system is no longer working. There are other companies that will simply replace this part and return it to you, but that will not prevent it from happening again in the future.

What we do is completely different. We bypass the original Brake Pressure Sensor Switch and fit our very own custom manufactured External Brake Pressure Sender Switch and calibrate it so that the manufacturing defect is no longer existing. This is the only way to completely remove all risks of the unit failing again and this is why we are confident enough to offer a full LIFETIME warranty on the unit.

Why Modify The Unit? – Why Not Just Replace The Damaged Part?

All other cars without the MK60 ATE ABS Control Module have the Brake Pressure Sensor fitted externally to the ABS Pump and guess what, they never fail!

Having the Brake Pressure Sender Sensor Switch fitted internally to the ABS Pump is a new space-saving idea which has gone terribly wrong and unfortunately dealerships are yet to recover from this outbreak of faulty units as they have not yet released a modification. Replacing the internal switch for another one will not permanently cure the problem as it will remain a manufacturing defective unit. In order to safe-guard the future of your ABS unit, you have to modify it to match it’s predecessors. All the older versions of the ABS units come without internal brake pressure switches and the ESP never failed because the switches were mounted externally. If something isn’t broken.. why try to fix it? The external switches were great and never failed, the internal brake pressure switch was a bad idea from the start.

SAFETY WARNING!!
There have been rumours of people and/or companies trying to repair these units and in some cases imitate our work. Please understand that although the ESP system is not absolutely crucial, modifying the ABS controller/pump in any way (without superior extensive knowledge) in the technology of advanced braking systems and electronic control modules, you will be risking the life of others. Please do not attempt to repair these units yourself and please do not offer such services to trade or the general public. We have been in business since 1972 as a group company and all our parts, services are fully tested before leaving the workshop. All units are thoroughly tested on specific specialist equipment to ensure maximum quality. Our ESP Fault Modifications come fully approved and as far as we’re aware, there is no other company out there that can successfully repair these units and completely remove the defective state.

If you’ve got a car with a Brake Pressure Sensor fault relating to the ABS unit or have the ESP light lit up on your dash, then call us today and we’ll give you an instant quote. The number to call is 0871 2887 666.

Tags : 00.0405-966C.1, 000405966C1, 00403046DO, 00403296d0, 01435, 01435 AUDI A3 BREAKE PRESSSURE SENSOR, 06.2012-0385.4, 06.2102-0117.4, 06.2102-0120.4, 06.2102-0142.4, 06.2102-0151.4, 06.2102-0153.4, 06.2102-0155.4, 06.2102-0158.4, 06.2102-0159.4, 06.2102-0262.4, 06.2102-0342.4, 06.2102-0393.4, 06.2102-0405.4, 06.2102-0407.4, 06.2102-0469.4, 06.2102-0477.4, 06.2102-0487.4, 06.2102-0497.4, 06.2102-0586.4, 06.2102-0623.4, 06.2102-0734.4, 06.2102-0750.4, 06.2102-0784.4, 06.2102-08​71.4, 06.2102-08​91.4, 06.2102-0934.4, 06.2102-0936.4, 06.2102-0983.4, 06.2102-1312.4, 06.2109-0596.3, 06.2109-0597.3, 06.2109-0661.3, 06.2109-0672.3, 06.2109-5100.3, 06.2109-5102.3, 06.2109-5153.3, 06.2109-52​00.3, 06.2190-0222.4, 06210204874, 06210209344, 06210906723, 06210951003, 06210951023, 10 0970 1114 3 10020700364, 10.0202-0164.4, 10.0203-0014.4, 10.0203-0068.4, 10.0204-00​21.4, 10.0204-0043.4, 10.0204-0061.4, 10.0204-0068.4, 10.0204-0113.4, 10.0204-0159.4, 10.0204-0160.4, 10.0204-02​13.4, 10.0204-0218.4, 10.0204-0254.4, 10.0204-02​57.4, 10.0204-02​59.4, 10.0204-0276.4, 10.0204-0402.4, 10.0204-0489.4, 10.0206-0005.4, 10.0206-0010.4, 10.0206-0015.4, 10.0206-0016.4, 10.0206-0024.4, 10.0206-00​40.4, 10.0206-0046.4, 10.0206-0048.4, 10.0206-00​71.4, 10.0206-0082.4, 10.0206-0105.4, 10.0206-01​06.4, 10.0206-0160.4, 10.0206-0161.4, 10.0206-0163.4, 10.0206-0167.4, 10.0206-0172.4, 10.0206-0172.4 ABS ECU ESP Faults Repaired, 10.0206-0172.4 ABS Pump, 10.0206-0172.4 Exchange Units, 10.0206-0174.4, 10.0206-0177.4, 10.0206-0178.4, 10.0206-01​80.4, 10.0206-01​81.4, 10.0206-01​82.4, 10.0206-01​85.4, 10.0206-0191.4, 10.0206-0206.4, 10.0206-02​20.4, 10.0206-02​21.4, 10.0206-02​23.4, 10.0206-02​24.4, 10.0206-0225.4], 10.0206-0226.4, 10.0206-02​40.4, 10.0206-02​41.4, 10.0206-0242.4, 10.0206-0250.4, 10.0206-0253.4, 10.0206-0259.4, 10.0206-0273.4, 10.0206-0286.4, 10.0206-02​99.4, 10.0206-0301.4, 10.0206-0302.4, 10.0206-0304.4, 10.0206-0305.4, 10.0206-0315.4, 10.0206-0316.4, 10.0206-0317.4, 10.0206-0322.4, 10.0206-0323.4, 10.0206-0325.4, 10.0206-0328.4, 10.0206-0330.4, 10.0206-0332.4, 10.0206-0334.4, 10.0206-0372.4, 10.0207-0002.4, 10.0207-0015.4, 10.0207-0036.4, 10.0207-0050.4, 10.0207-0051.4, 10.0207-0056.4, 10.0207-0068.4, 10.0207-0071.4, 10.0207-0075.4, 10.0208-04​20.2, 10.0212-0012.4, 10.0212-0045.4, 10.0212-0068.4, 10.0399-2447.4, 10.0399-2885.4, 10.0399-28​93.4, 10.0399-2908.4, 10.0447-0733.3, 10.0447-07​43.3, 10.0925-03​21.3, 10.0946-0102.3, 10.0946-03​11.3, 10.0946-03​12.3, 10.0949-03​77.3, 10.0949-0420.3, 10.0960-0111.3, 10.0960-0112.3, 10.0960-0115.3, 10.0960-0115.3 ABS ECU ESP Faults Repaired, 10.0960-0115.3 ABS Pump, 10.0960-0115.3 Exchange units, 10.0960-0119.3, 10.0960-0122.3, 10.0960-0125.3, 10.0960-0129.3, 10.0960-03​40.3, 10.0960-03​55.3, 10.0960-03​59.3, 10.0960-0425.3, 10.0960-0539.3, 10.0960-08​31.3, 10.0960-11​69.3, 10.0960-1170.3, 10.0960-1173.3, 10.0960-1175.3, 10.0960-1179.3, 10.0960-1181.3, 10.0960-1182.3, 10.0960-1184.3, 10.0960-1185.3, 10.0960-1404.3, 10.0960-1411.3, 10.0960-1428.3, 10.0960-1435.3, 10.0970-0115.3, 10.0970-03​15.3, 10.0970-1109.3, 10.0970-1114.3, 10.0970-1134.3, 10020602064, 100207-00364, 10096005393, 100970-11143, 1258629-D, 132113610, 133200-5000, 13664105, 15732101, 15871906, 1H0907379A, 1H2614117A, 1H2614117B, 1H2614117E, 1H2614217A, 1H2614217B, 1H2614217C, 1H2614217E, 1J0614117A, 1J0614117C, 1J0614117D, 1J0614117E, 1J0614117F, 1J0614117G, 1J0614217A, 1J0614217B, 1J0614217E, 1J0614217J, 1J0614317C, 1J0614417C, 1J0614417D, 1J061517E, 1J061517F, 1J061517J, 1J0907379A, 1J0907379D, 1J0907379M, 1k0614117 Exchange Units, 1K0614117A Exchange Units, 1K0614117B Exchange Units, 1K0614117H Exchange Units, 1K0614517, 1K0614517 Exchange units, 1K0614517A​A, 1K0614517AA Exchange Units, 1K0614517A​B, 1K0614517A​C, 1K0614517A​E, 1K0614517A​F, 1K0614517B​D, 1K0614517C, 1K0614517H, 1K0614517H ABS ECU ESP Faults Repaired, 1K0614517H Exchange Units, 1K0614517HBEF Exchange Units, 1K0614517J, 1K0614517J Exchange Units, 1K0614517K, 1K0614517M, 1K0614517M Exchange Units, 1K0614517N, 1K0614517N Exchange units, 1K0614517Q, 1K0614517R Exchange Units, 1K0614517T Exchange Units, 1K0907379 Exchange Units, 1K0907379A Exchange units, 1K0907379AA Exchange Units, 1K0907379AC, 1K0907379K, 1K0907379K Exchange Units, 1K0907379M, 1K0907379Q, 1K0907379Q Exchange Units, 1K0907379R, 1K0907379R Exchange units, 2050, 2055, 2074, 2111, 2125, 2139, 2153, 28.5600-1002.3, 28560010023, 2M51-2M110-EC, 2M51-2M110-EE, 2nd hand abs pumps esp fault, 30736588, 30742654, 34.51-11162291, 34.51-1158403, 34.51-116095, 34.51-1164047, 34.51-1164095, 34.51-1164896, 34.51-1164897, 34.51-2228108, 34.51-2229800, 34.51-6751767, 34.51-6753598, 34.51-6756287, 34.51-6757062, 34.51-6757065, 34.51-6759045, 34.51-6759073, 34.51-6763959, 34.51-6765452, 34.51-6772213, 34.51-6772214, 3M51-2C405-AD, 3M51-2C405-HA, 3M51-2C405-HA ABS ECU ESP Faults Repaired, 3M51-2C405-HA ABS Pump, 3M51-2C405-HA Exchange Units, 3M51-2C405-HA Mazda ABS ECU Problems, 3M51-2C405-HB, 3M51-2C405-HE, 4060471403, 44510-1005​0, 44510-17021, 44510-17070, 44510-17080, 44510-20260, 44510-20340, 44510-4060, 44510-42020, 44510-42080, 44510-52190, 44510-60020, 44540-24010, 4670A340, 57KA, 6279, 65J9, 6N0614117E, 6Q0614117C, 6Q0614117H, 7H0614111E, 7M0614111AE, 7M0614111C, 7M0614111L, 7M0614111P, 7M0907379A, 7M3614111, 7M3614111H, 8200007442B, 8619534, 8619535, 8954142140, 8E0614111A​B, 8E0614111A​H, 8N0614217, 8N0614517A, 8N0614517E, 8N0614517H, 8Z0614517E, 8Z0614517G, 9140775, 9157654, 9157654B, 92GB2C219AD, 92VB2C19AC, 9401541, 9472970, 9496941, 95GB2C285AD, 96 523 429 80 10097011143, 96-523-429-80, 9635584980, 9641767380, 9652342980, 9662295780, 97BD2C285AB, 98AG2C285BF, 98BG2C285CB, 98BG2C285DB, 98BG2M110AE, 98FB2M110BA, 98FB2M110BB, A2 ESP STORING, abs eps brake pressure sensor faults, ABS ESP Fault G201 01435 LIFETIME Warranty, ABS Repairs With LIFETIME Warranty, ABS sensor fault audi a6, ATE 10.0206-0172.4, ATE 10.0960-0115.3, ATE 100206-01724, ATE 10020601724, ATE 100960-01153, ATE 10096001153, ATE MK60 ABS ASC Pump module, ATE MK60 ABS ASC Pump module repairs, Audi A2 Brake Pressure Sender Fault, Audi A2 Brake Pressure Sensor Failure, Audi A2 Brake Pressure Sensor Fault, Audi A2 Brake Pressure Sensor Problem, Audi A2 ESP light is on, Audi A3 ABS Brake Pressure Sensor Problems, Audi A3 Common Brake Pressure Sensor Fault ESP, Audi A3 ESP light is on, Audi A3 ESP Light On, Audi A3 G201 ESP Fault, Audi A3 G201 ESP Problem, audi a4 abs fault, audi a4 abs pump repairs, Audi A4 Brake Pressure Sensor Failure, Audi A4 Brake Pressure Sensor Fault, Audi A4 Brake Pressure Sensor Problem, Audi A4 Common ESP Fault, Audi A4 ESP light is on, Audi ESP Light On, Audi ESP Problem, audi quattro brake problems, BMW 1 Series Brake Pressure Sender Sensor Switch Failure, BMW 1 Series Brake Pressure Sensor Repairs, BMW 1 Series ESP ABS Pump, BMW 1 Series ESP Fault, BMW 1 Series ESP Fault Repairs, BMW 3 Series Brake Pressure Sensor Faults, BMW 3 Series ESP ABS Repairs, BMW 3 Series ESP fault, Brake Pedal Sensor Problems Fixed, Brake Predal Sensor Fault, Brake Pressure Sensor, Brake Pressure Sensor vw, Buy A VW Golf ABS Pump ESP Fault, Buy A VW Golf ABS Unit, C0131 - Pressure Sensor Circuit Malfunction, C1288, C1288 PRESSURE TRANSDUCER MAIN/PRIMARY CIRCUIT FAILURE, Citroen ESP (Brake Pressure Sensor G201) Fault, common faults on vw touran, eps failure abs pumps, ESP ABS Brake Pressure Sender Problems, ESP ABS Brake Pressure Sensor Repairs, ESP ABS Pumps In Stock, ESP Cars, ESP Fault, ESP Light On, ESP Problem, ESP Problems, ESP Problems Repaired & ABS Pumps In Stock, ESP SENSOR VW GOLF REPLACEMENT PRICE CAUSES, esp vw passat, Fault Code C1288, Fault Code C1288 ESP ABS Problem, Fault Code G201 01435 ABS Unit Repairs, find esp fault code seat technical, find failed esp code seat, fixing ESP system fault on ford focus, Ford Focus ESP ABS Light On, Ford Focus ESP ABS Pump, Ford Focus ESP Failure, Ford Focus ESP Fault, G201, G201 01435, how do i remove seat altea abs module, how to replace abs sensor vw passat, leon g201, location of g201 seat, Mazda 3 ABS Failure, Mazda 3 ABS fault, Mazda 3 ABS problem, Mazda 3 Brake Pressure Sender Fault, Mazda 3 Brake Pressure Sensor Failure, Mazda 3 Brake Pressure Sensor Fault, Mazda 3 Brake Pressure Sensor Problem, Mazda 3 Common ESP Fault, Mazda 3 ESP light is on, Mazda ABS Fault Code "C1288 PRESSURE TRANSDUCER MAIN/PRIMARY CIRCUIT FAILURE", Mitsubishi Outlander 2.0 EPS Fault (Brake Pressure Sensor), Mitsubishi Outlander 2.4 (ESP) Brake Pressure Sensor, MK60 ATE ABS ESP FAILURE HELP, MK60 Teves ESP Faults, no ecu communication on audi, Passat esp fault, Peugeot ESP (Brake Pressure Sensor G201) Fault, removing seat altea abs control unit, Renault ESP (Brake Pressure Sensor G201) Fault, replacement eps abs pumps, Seat Altea Brake Pressure Sensor Errors, Seat Altea Brake Pressure Sensor Fault, Seat Altea Brake Pressure Sensor Problem, Seat Altea ESP light is on, seat altea switches, Seat ESP Light On, Seat ESP Problem, Seat Leon Brake Pressure Sensor Failure, Seat Leon Brake Pressure Sensor Problem, Seat Leon ESP ABS faults, seat leon esp fault, Seat Leon ESP light is on, Seat Leon ESP Problem, Seat Leon G201 ESP Fault, Seat Leon G201 ESP Problem, Seat Toleda brake pressure sensor failures, Seat Toleda brake pressure sensor faults, Seat Toleda brake pressure sensor problem, Seat Toleda ESP ABS light is on, sinspeed mazda 3 traction control, Skoda ESP Light On, Skoda ESP Problem, Suzuki ESP (Brake Pressure Sensor) Fault, Teves MK60 ABS ESP ECU Module Faults, Teves MK60 ESP ABS ECU Module Repairs, Toyota ESP (Brake Pressure Sensor) Fault, Volkswagen Bora ABS brake pressure sensor fault, Volkswagen Bora ABS ESP brake pressure sender fault, Volkswagen Bora ESP light is on, Volkswagen ESP Light On, Volkswagen ESP Problem, Volkswagen Golf 01435 Brake Pressure Sensor Sender ABS Fault G201, volkswagen golf ABS brake pump replacement, Volkswagen Golf ABS Error, Volkswagen Golf ABS ESP Switch Fault, Volkswagen Golf ABS Fault, Volkswagen Golf ABS Problem, Volkswagen Golf Brake Pressure Sensor Fault, Volkswagen Golf ESP Brake Pressure problem, Volkswagen Golf ESP Failure, Volkswagen Golf G201 ABS Fault, Volkswagen Passat brake pressure sensor switch, Volkswagen Passat brake pressure sensor switch fault, volkswagen passat esp abs light is on, volkswagen passat esp pressure sensor failure, volkswagen touran abs esp light is on, volkswagen touran brake pressure sender switch repairs, volkswagen touran brake pressure sensor, volkswagen touran brake pressure sensor switch problem, Volvo S40 Brake Pressure Sensor Faults, Volvo S40 ESP ABS ECU Faults, Volvo V50 ABS ECU Faults, Volvo V50 ABS ESP Repairs, VW 01435, vw abs pump module, VW Bora ESP ABS brake pressure sensor switch fault, vw esp defect, VW ESP Light On, VW ESP Problem, VW Golf ABS Brake Pressure Sensor Not Working, vw golf abs pump repair, VW Golf Brake Pressure Sensor Error, VW Golf ESP Light is on, vW Golf Esp switch failure, vw passat pressure sensor abs fault, vw tourag abs esp problem, vw tourag abs fault, vw tourag abs problem, vw tourag brake pressure fault, vw tourag brake pressure sensor problem, vw tourag brake sensor fault, vw tourag esp abs brake pressure sender problem, vw tourag esp failure, vw tourag esp fault, vw touran brake pressure sensor fault.
232 thoughts on “Common ABS (ESP) Fault – Brake Pressure Sender / Sensor Switch Failure – Audi / Mazda / Mitsubishi / Seat / Skoda & Volkswagen
    • Hi Robert,

      We have a few on the shelf for that vehicle and we also offer own unit repair services. For a quote, please call us on 0871 2887 666 or alternatively click here to email us. Please note, we will need your ABS unit’s corresponding part numbers so please have this to hand.

      Thanks,
      Tech Team
      Sinspeed Ltd

  • I have a 2006 Seat Altea 2.0 Reference Sport (mileage approx 30,000 miles) where the ABS light has recently come on and stayed on and a recent diagnostic check says that there is a brake sensor fault. I was very interested in reading the above and that you have found a way to bye pass the existing unit. Unfortunately I live in Spain and it would be impossible for me to bring the car back to the UK in the foreseeable future.

    I understand that you like to fit these units yourself but are you able to supply the necessary part with fitting instructions and calibration figures to me to pass on to my mechanic? If you are, could you please let me know what costs are involved.

    Many thanks

    Clive Sutton

    • Hi Clive,

      Certainly, we help customers all over the world with these common faults. We have units on the shelf for your vehicle & also offer an own unit repair service, however, in order to quote you I would require the corresponding part numbers from your unit. Please click here to email us your part numbers. We will supply full step by step re-calibration instructions which can be carried out using a VAGCOM system.

      Many Thanks,
      Tech Team
      Sinspeed Ltd

  • Hi there,

    I'm from Brazil, own a 180hp 2002 Golf GTI and i have the red ESP light always on (an exclamation point inside a triangle and a circle).

    Lately i've been trying fix it without success.

    Right now my car is under regular maintenance so we can get everything fixed in order not to let anything else interfere on the sensor signals, then i can be sure if the fault is really on the sensor itself or if its related to ABS or something else.

    As my car is at the Volkswagen authorized service, could you guys help me out how to figure what is probably causing the ESP light to be always on? Maybe if i get the VAG error codes, that will be any helpful?

    Also, is the Passat ESP sensor the same as Golf GTI sensor?

    Right now i have a Passat ESP sensor and will try it on my car to maybe get the problem solved..

    Anyway, thank you guys in advance for the help!

    Feel free to e-mail me.

    • Hi Jack,

      It's a very common fault and we're currently repairing at least 10-15 units a day with the same faults. The problem is inside the ABS control module but we'll need the whole unit with the hydraulic pump so that we can custom-remanufacture it with our very own custom fabricated external pressure switch. Please supply us with a part number from your unit (for VW golf the part number will start with 1KO) with this number we can tell you if we have one in stock and how much it will cost. If we don't have it in stock, we can remanufacture your own unit which takes 3-5 working days.

      The Passat ESP unit will not work on your vehicle, unless the numbers are identical but will still have to be calibrated using a VAGCOM system of some sort.

      Kind Regards,
      Tech Team
      Sinspeed Ltd

  • I have a 2007 Honda S2000 and at 12500 kms the vsa (esp? ) warning lights came on.

    The stability assist is definitely not working.although the ABS is fine. My Honda dealer tells me that the problem is the brake pressure sensor located with the ABS and though the failed part is small, its located within the ABS and the sensor will have to be replaced at a cost of approx 1500 euros. ( I live in Cyprus ) It appears that failure with these ATE parts is very common to the extent that I believe in the USA there was a safety recall for some Honda cars fitted with the parts. The part fitted to my car looks identical to the pictures on your website,and the part no is ATE 06.2102-0262.4 Would you be able to repair/replace this unit? ( assuming I,ve identified the correct part )

    Regards Don Buckland

    • Hi Don,

      Certainly we can offer remanufactured units off the shelf and also, a service to repair your own unit, however, please can you respond with some more part numbers so we can identify the correct unit. That number you've given us does not match up to any on our records. It's certainly the right unit but we cannot always cross reference all numbers so please respond with all the part numbers you can see on the control module.

      Kind Regards,
      Tech Team
      Sinspeed Ltd

      • Tech team,
        Thanks for your reply sorry for dely in reply been out of country,
        following are all of the numbers that are on the black can portion of the abs/vsa unit.
        57110-52A-A512-M2 DE(type.2AVVV ) S2AA5 ATE 06.2102-0262.4
        The car is a Honda S2000 Nov 2006

      • Hi Don,

        Sorry for our late response. The ATE number you gave us is generally the number we go by. We can test & repair these units, we don't have any with that matching part number in stock at the moment but if you'd like a quote to have your own unit tested & repaired, please call us on 0871 2887 666 or drop us an email and someone will get back to you with a price.

        Kind Regards,
        Tech Team
        Sinspeed Ltd

        • Please quote price to repair my s2ooo abs/vsa modulator., and approx time to repair
          Can you confirm that on refit it will perform as per the orginal, and not need any ecu adjustment?
          Thanks and Regards Don Buckland

          • Hi Don,

            Please confirm the part numbers from your unit & the fault your having with the unit as well i.e. what lights are showing on the dash and has it been diagnosed on a machine?

            If we're doing a supply & fit job, the ecu is fully reprogrammed (if required) and inclusive in all quotations.

            King Regards,
            Tech Team
            Sinspeed Ltd

  • Hi

    I have an almost identical problem on my 2006 Seat Leon FR where the warning light is continually on, except that my ESP switch in the centre console is not illuminated and will not light up no matter how many times I press it.

    A diagnostics check at a local garage returned no error (although i'm sceptical as to whether he knew what he was doing) and suggested maybe it was just the switch that was faulty (ie jammed).

    Have you ever come across anything like that?

    Cheers & regards,

    Matt.

    • Hi Mathew,

      That's exactly what happens on the Seat Leon's across the range with internal Brake Pressure Switches built into the ABS control module. We carry these units on the shelf now due to how common they've become. If you can supply us with a part number, we can quote you on a repair/replacement unit. Please email us your part numbers and a contact number and we'll call you right back with a quotation.

      Many Thanks,
      Tech Team
      Sinspeed Ltd

  • Hi Admin

    But above you state that it returns fault code “01435 Brake Pressure Sensor 1 (G201)” or it would have given you the following fault description: “Brake Pressure Sensor” or “Brake Pressure Sender”.

    But my garage got none of these errors, so it's surely not the same problem?

    Don't worry if you can't help, I just thought I would try my luck.

    Kind regards

    Matt.

    • Hi Mathew,

      If the ESP light is illuminated on the dash, then there will be an error code for it – it is possible that the garage you used did not have the appropriate diagnostics equipment to read the code for the ABS system.

      Kind Regards,
      Tech Team
      Sinspeed Ltd

  • Hi my friend is looking at a passat to buy which has the abs and Eps lights on also display shows “stop brake failure” even the airbag light is on. Can all these pros be related to this pump module? other than that the car is good and if this module can be updated will be a good buy.
    The car is a v reg 1.8 se VW Passat estate, petrol, manual.
    How easy is this module to remove?

    Cheers Andy.

    • Hi Andy,

      The ABS & ESP light are related to the abs module, however, have it scanned with a VAGCOM or equivelant diagnostics tool to bring up the fault codes and see what it tells you. Make a note of the faults and then erase the codes – if the lights go out and don’t come back after a short drive, then it’s possible it was a logged fault such as a wheel speed sensor which was replaced but the fault codes may not have been reset.

      If the lights do not go out or come back on after a short drive, then you know there is a problem somewhere in the circuit. There’s not a lot that can go wrong in the ABS system but if it is the ABS module in this case, on this year of vehicle it will not be an expensive repair. For an instant quote, give us a call or an email as we don’t list prices on our website.

      They’re very easy modules to remove with just a couple of mounting bolts, a big multi-plug and 6 brake lines. We always suggest disconnecting the battery terminals prior to removing any modules from the vehicle to avoid power surges and sparks.

      I hope this helps & thanks for reading.

      Best Regards,
      Tech Team
      Sinspeed Ltd

  • Hi,

    The ABS / ESP fault lights came on on my 2005 Golf Plus 1.6 FSI a few months ago. As you have noted we were quoted over £1,200 to replace by my local garage. On being advised that this did not constitute an MOT failure we decided to live with it in the short term. Given that we may be able to reduce the cost of repairing this fault I would be grateful if you could give me a quote for the replacement part. Also I am in Glasgow. Would my local garage be able to fit the replacement part.

    Regards,

    Stuart

    • Hi Stuart,

      Actually this type of ABS fault will not pass an MOT because the ABS warning light is lit on the dash. We can certainly remanufacture & modify the unit or even provide a unit off the shelf as a replacement to you at a fraction of the cost you were quoted. For more information and a quote, please call our offices on 0871 2887 666 or alternatively if you provide us with a contact telephone number, a member of our team will call you back.

      Best Regards,
      Tech Team
      Sinspeed Ltd

  • Hi Guys,

    I recently sent my car to my local mechanic who changed both front wheel bearings. After the change he reported that there was an ABS fault on the near side front wheel.

    After spending some time trying to solve this hes come back saying that the ABS Module has failed.

    The part that failed is an AUDI A2 ABS Pump (MK60 ATE)

    I checked with AUDI and they want £1025 for a new module which only has a 2 year warranty.

    My mechanic suggested contacting you guys as it seems that you can fix or replace the parts for much cheaper.

    Could you get back to me and give me a quote for the part.

    Cheers

    Iain Blackwood

    • Hi Iain,

      First check to make sure the near side front wheel sensor is not damaged. Knocking this sensor can cause damage easily as they are quite fragile, check the continuity of the wiring and if required, replace the sensor. This should cure the fault. Also, try to clear the fault code with a scanner and then road test the vehicle to ensure the light stays off. If it does come back on and all else checks out okay, then we can certainly look to repair or replace this unit for you. We carry the MK60 ATE units on the shelf in all part numbers and have recently had a massive price drop as well.

      For a quote & more information, please send us an email or call us on 0871 2887 666 and an advisor will be happy to assist you.

      Kind Regards,
      Support Team
      Sinspeed Ltd

      • Hi Guys,

        The mechanic has done this, he has even replaced the sensor. Hes had over 2 weeks with my vehicle so I think that he has exausted all other avenues. Thisleads me to believe that this is the actual problem, I probably should have mentioned that the ESP warning light is on as well.

        Also the mechanic says he looked inside the module and said one of the pins/points? (I wasnt really sure what he was talking about) is corroded.

        Currently he has disabled the ABS and ESP system so that I can actually drive my vehicle as before he did this the breaks were extreamely stiff as the ABS was firing even at low speed and gentle breaking causing it to seem as if you werent really breaking.

        What do you think?

        Regards,

        Iain Blackwood

        • Hi Iain,

          Okay I'd suggest removing the unit (complete) with the hydraulic pump and sending it to us for a "Test & Report" so that we can connect it up to our test rig and run the pump to see what faults it brings up. We will then inspect the unit for any physical defects as well and then contact you before going ahead with any repairs/modifications and quote you accordingly.

          Best Regards,
          Tech Team
          Sinspeed Ltd

  • I have an Audi A3 special edition 07, and just made an appointment for Friday at my local audi garage where i bought the car 4 years ago. The ESP fault brake pressure is what the mechanic said, so im bracing myself for the news on friday. Thanks very much for the forum, it helps to understand what is going on with the ESP system, and it is confusing as to why there is a fault. Surely audi should repair it (good will) if this is a common problem.

    Many thanks once again and hope to be in touch.
    Regards,
    Dean

    • Hi Dean,

      It is a very common fault and most dealers will in good will offer to reduce the cost of a replacement ABS pump by up to 50% depending on the year of the vehicle and if it has been regularly serviced by the dealer. However, the units have not yet been corrected and so it will be a like for like pump being replaced meaning the fault will eventually come back.

      What we offer is a modification to your original unit to ensure the manufacturing defect is correct to eliminate the fault so it doesn’t reoccur. This is all done during the repairs to ensure full functionality with complete peace of mind. We carry almost every part number readily available in stock so there isn’t any waiting around.

      We offer collect & return services FREE depending on your location and a very affordable fitting service. Send us an email or call us on 0871 2887 666 to find out more.

      Best Regards,
      Tech Team
      Sinspeed Ltd

  • Hello, my 2006 VW Golf Mk 5 has been diagnosed with the “01435 Brake Pressure Sensor (G201) Fault" as the ESP light is permanently on. I understand that VW now do a repair kit (1K0698517B). Can you tell me how this compares to getting the existing unit repaired as II'm not sure which option to go for?
    San

    • Hi San,

      The repair kit cures the fault but the unit will remain with the same OE manufacturing defect. Repairing your own unit or even buying a replacement from us will ensure it is modified and fully guaranteed by us for two years. Also, our exchange units no longer require programming!

      For information and pricing, please send us an email or call our office on 0871 2887 666.

      Regards,
      Sinspeed Ltd

  • I am interested in what you offer as a solution to my ESP problem. My warning light is intermittently flickering on and off and the car feels very unstable. I do not want to spend a fortune on possible and not actual cures. I have a VW Passat 54 plate 1.9 Tdi. Where are you based?

    • Hi Dave,

      We've got a few bases now and have the units readily available on the shelf. Drop us an email with your details or call us on 0871 2887 666.

      Regards,
      Sinspeed Ltd

  • Hi, What a great forum, I have an 07 Seat Leon and for the last couple of days four warning lights appeared all at the same time while driving, 1st being the ESP light, 2nd was the brake fluid warning light which was flashing, 3rd was the ABS warning light and 4th was the brake pad wear indicator light, I've checked the fluid level,the pads and all is ok, the lights don't stay on all the time, I pulled up switched off the ignition then restarted after a few minutes and all light were off and stayed off for the remainder of the journey approx 5 miles, any ideas.

    regards,
    Gary.

    • Hi,

      This type of fault will have to go onto VAGCOM to see if there are any codes and carry out a thorough diagnostics on the car. Contact our office via email or telephone 0871 2887 666.

      Regards,
      Sinspeed Ltd

  • I have an Audi A6 2006 with this specific problem. Tried to send you an email by using your above link "Clink here to send an email" but no one got back to me. Is there any other email I can use to get a quote? Thanks.

    • Hi,

      Sorry our systems have been down but can confirm all emails were responded to today. You can alternatively call us on 0871 2887 666 or Jay on 07768 247 007.

      Thanks,
      Sinspeed Ltd

  • Hi __I have just bought a VW Pasasat 2003 tdi. having problem with braking. When i brake initiall ok but just before it stops it makes a grinding sound before coming to a halt. . Also the ABS light comes on after a while as i continue to drive. Had the brake pads changed resently to eliminate the problem. Can any one advise, what i need to get done or checked. Thanks

    • Hi Peter,

      It sounds like it could be a hub assembly problem. Inside the hub when the bearing fails then the abs sensor ring can have play in it which would cause the ABS sensor on that hub to get incorrect readings and will cause DTC error codes to flag up in the ABS ECU causing the ABS light to come on. Have your local garage check your hubs and same time brake discs and speed sensors.

      Hope this helps.

      Best Regards,
      Tech Team
      Sinspeed Ltd

  • I have a 2006 VW Touran and took it to main dealer last week for full service and to check why car was hard to start.
    Main dealer could not diagnose fault but this week when the car has not started the ABS lights on dash and centre console were illuminated. After turning key to on / off several times ABS light went out and i can start car – will altering my ABS unit sort out my car starting problems?

    • Hi Sam,

      There are several ECU's on a modern car and they all handshake with each other. On some cars, if a module is defective and not communicating correctly, it can cause starting issues. We can look into this fault for you, please call us on 0871 2887 666 or email us to discuss the costs involved. All our ABS repairs come with a full 2 year warranty.

      Regards,
      Sinspeed Ltd

      • Dear Sinspeed,
        I'm over in Malaysia, and I own an MK5 09 model. The ESP light and the tyre pressure light are on simultaneously, while the ABS and the electro mechanical lights do come on intermittently. Is the problem I'm having probably due to faulty ABS sensors or the pump?
        I hope you can reply me to my mail at melvyn_ong77@yahoo.com
        Thanks, so much.

        • Hi,

          Could possibly be ABS pump or sensor fault but I would recommend having an auto electrician carry out a diagnostics on the vehicle and check the sensors before assuming to replace any parts. If the ABS pump is found to be at fault, we can definitely test the unit for you to confirm this and repair or replace it at very affordable costs.

          Regards,
          Sinspeed Ltd

  • I have a 2004 1.9 tdi vw touran how much do you charge to fix this problem? I possible can you collect and deliver the car please.

    • Hi,

      Sorry for late response but can confirm we collected your vehicle already, carried out the repairs and delivered the vehicle back to you along with extra repairs at no additional cost to you. Hope you've been happy with our service, would love to hear from you.

      Regards,
      Sinspeed Ltd

  • Hi,
    I have an Audi A2. 51 plate. I have errors in relation to the ABS sensor, but nothing about 'brake pressure sensor'. I have the ABS light little circle with arrow and yellow steering wheel in middle. Somtimes tI can go a couple of days without the errors.

    My errors are :
    18057 powertrain data bus missing message from abs controller p1649 – intermittent.
    65535 internel control module memory error. 00-00
    00778 steering angle sensor (G85) 49-10 No communications – Intermittent.

    I'm seeing a control module part of 8Z0 907 379 B

    Can you advise? this doesn't seem to match the other peoples errors on here?

    Regards

    • Hi Darren,

      All these faults can relate back to an ABS control module failure. The best option would be to remove the ABS pump complete and have it tested intensively. For information on this, send us an email or call us on 0871 2887 666.

      Regards,
      Sinspeed Ltd

  • hi ,after recently removing my steering wheel to replace faulty indicator stalk, and then replacing it, i have noticed the esp light has appeared on the dash? before that it was off, but has come on was or twice which caused a lost of power, but was rectified by turning ignition off and re-starting it. any ideas would be gratefully received? thanks…

    • Hi,

      This sounds like a steering angle sensor fault, not necessarily the sensor require replacing but either recalibrating or adjustment of the steering wheel to align it correctly with the splines on the shaft. I would recommend having the vehicle connected to VAGCOM or similar diagnostics depending on the vehicle to see what the steering angle sensor readings are when the steering wheel is straight.

      Regards,
      Sinspeed Ltd

  • Hi
    I own a Audi a4 52plate 1.9tdi for about 2 weeks now ive been getting the ESP warning light come on my dashboard after driving for about 5-10mins.I plugged it in to a VAG 5053+ to see if there were any codes and it read
    8E0614517
    ABS/ESP
    front
    17260265950011
    bb
    code:04255

    any ideas?

    Thanks Andrew

    • Hi Andrew,

      The 8E0 number is the part number of the unit and the 04255 code relates to the soft coding of the unit. There should be a fault code with fault description just below that information. Please copy & paste all information you see on your VAG 5053+ to us and we will try our best to help you. The long number starting with "17260.." doesn't correspond to anything, possibly a serial number of some sort. You'll be looking for fault codes generally starting with a P or a 5 digit code, for example see below:

      18258 – Powertrain Data Bus: Missing Message from ECU
      P1850 – 35-10 – – – Intermittent

      Please check again and come back to us if you require any further help or information.

      Best Regards,
      Jay @ Sinspeed Ltd

  • hi i have a 2004 bmw 1 series 118d. all my dash lights are showing and abs light too. it judders wen i drive alot. if i put my dtc on it drives a bit better. ive taken it to a garage and they have told me i need a new rear wheel shaft motor? do u think i need this?

    • Hi Kuldeep,

      Which dash lights are on and also, have you had the fault codes read from the OBDII point?
      Wheel bearing slack could cause loss of signal or incorrect signal from one wheel which could possibly cause the juddering and ABS light to come on but shouldn't be all your dash lights on.. would need more information on this.

      Best Regards,
      Support Team
      Sinspeed Ltd

  • Hi, I have a VW 1.6 Golf Match Mk5 (56 plate) and the traction control light on the dash is constantly on. I am unable to turn it off using the ESP button. My mechanic did some tests in the VW garage and advised that I'll need to replace the control unit which will cost around £800 for the part.

    I've just read the info above which was very usefull. What do you think the best way to fix this problem is?

    • Hi Ketan,

      A very common issues especially with your particular vehicle. We have replacement units in stock and at the moment have a major promotion on this unit. We can offer a supply & fit service at a fraction of the cost. Also, all our units are supplied with our LIFETIME warranty. For pricing & more information, please call us on 0871 2887 666 or alternatively, please supply a contact number and we'll call you straight back.

      Best Regards,
      Support Team
      Sinspeed Ltd

    • Hi Mark,

      Try deleting the fault codes, light should go out – if not, disconnect the battery for an hour and re-connect see if that works. If the problem still persists, please let us know the fault codes you're seeing on the ABS module.

      Kind Regards,
      Tech Team
      Sinspeed Ltd

  • Hi I have a golf mk4 v6 4motion on a w (2000) reg, my ESP button doesn’t light up when I press it and it doesn’t come up on my dash board, but I have the ABS light on on the dash also my 4 wheel drive isn’t working I’m guessing because the ESP button? help as I need to know if the car I have just bought is going to the scrap yard! Also the engine management light sometimes decides to come on when it feels like it?!

    • Hi Chelsea,

      Firstly, apologies for the late response to this query, we have been overwhelmed with enquiries recently. Your vehicle wouldn't be affected by the internal braking pressure sensor problem, however, it does sound as though the ABS pump has a malfunction within. It could also be a wheel speed sensor fault, you'd need to get into a local workshop to have the fault codes read from the ABS and Engine ECU to help diagnose the root cause of the problem.

      If there is an ABS fault, we can possibly remanufacture the ABS unit at a very cost-effective price and it will be returned with a lifetime warranty.

      For more information, please call our office on 0871 2887 666 or alternatively you can send an email to our support team for further assistance.

      Kind Regards,
      Tech Team
      Sinspeed Ltd

    • Hi Susan,

      Yes, we ship to Ireland quite frequently actually. We can post worldwide to any destination.

      Regards,
      Sinspeed Ltd

  • Hi, I think i may have the same issue, my ESP doesn't work, and the ESP OFF button is constantly illuminated with no effect when pressing it. The only difference is that i have no light illuminated on the dash. I have had a scan which has come back with the code described above. Cheers

    • Hi Dave,

      A strange one, could be the bulb which is used to illuminate the ESP light on the dash could be damaged or previously removed if this was a known problem by a previous owner or garage for example. However, having the fault code G201 / 01435 suggests you definitely have the same fault as described. We now have these units readily available on the shelf for a next-day dispatch and also a very affordable and cost-effective fitting service.

      For more information, please call our office on 0871 2887 666 or send an email to the support team. Alternatively if you can provide us with a contact number, I can have a member of our team call you back.

      Best Regards,
      Sinspeed Ltd

  • Hello, my grandfather has a passat 1.8 T from 2003 when ESP lamp starts and stops sometimes. What could be the problem?

    • Hi Jesper

      We’d need to have the vehicle in to run a full diagnostics to see where the problem is coming from. Please call our office for details on 0871 2887 666 or alternatively if you send us a email, we will get straight back to you.

      Best Regards
      Support Team
      Sinspeed Ltd

    • Hi Michael

      We’d need to diagnose why the ESP light has come on. It may not be the brake pressure sensor problem which we’ve listed in the article. Please call our office for details on 0871 2887 666 or alternatively if you send us a email, we will get straight back to you.

      Best Regards
      Support Team
      Sinspeed Ltd

    • Hi Mr Middis

      We have the unit readily available in stock for both postage and fitting service is required. For pricing, please call our offices on 0844 847 9999 or alternatively, please send an email and a member from our sales team will get right back to you.

      Kindest Regards

      Jason
      Support Team
      Sinspeed Ltd

  • Hi,
    I have a 2005 VW Passat (UK) 1.9 TDI with 38k miles. There are three yellow lights on the dashboard which are lit:
    1 – glow plug light (flashes),
    2 – parking brake system fault,
    3 – electronic stabilisation programme.

    I also get an engine fault and a parking brake fault message on the console when I start the car. My mechanic tells me the fault codes indicate a faulty brake pressure sensor in the ABS unit and that as a sensor repair kit isn’t available I will have to replace the complete ABS module – approx £1200 for a new unit…..

    Does this sound correct and what do you advise are the options for replacing the ABS unit if he is correct?
    Thanks,
    Des

    • Hi Des

      Well, most VW Passat’s have an external ‘Brake Pressure Sensor’ screwed in to the side of the ABS block, however, if you send your unit in to our workshop, we can remanufacture it at a fraction of the cost of replacing the unit – and no programming will be required. We also offer a fitting service as well.

      For pricing, please call our offices on 0844 847 9999 or alternatively, if you send an email.. a member from our sales team will get right back to you.

      Kindest Regards

      Jason
      Support Team
      Sinspeed Ltd

  • Hi,

    I have a 2008 golf mk5 1.9 bluemotion with 4 lights on my dashboard, abs, ESP and brake light and a constant loud beeping noise, I’m not sure if it has any thing to do with it but the 4th light is a yellow steering wheel? The car was involved in light front end damage and parked up for nearly a year, does that sound like an abs pump failure?

    Regards

    Patrick

    • Hi Patrick

      Thank you for your enquiry.

      This sounds like a complete ABS pump failure. When the ABS pump loses communication with other modules, it will cause all three lights to appear on the dashboard and in some cases even the steering wheel light (yellow/red) because it is linked to the steering angle sensor. However, we recommend having the vehicle connected to a diagnostics system to confirm the faults. I believe we have the Golf Mk5 1.9TDi Bluemotion ABS pumps in stock if you do require one and we can offer the diagnostics & fitting services if needed.

      For more information, please call our offices on 0844 847 9999 or alternatively please email us and a member of our team will get back to you.

      Kindest Regards

      Jason
      Support Team
      Sinspeed Ltd

  • Hi there, I have a 2006 BMW 1 Series and I have got both the brake light and traction light constantly on my dashboard in amber.. Do I need to have this abs module rebuilt? The computer shows as there being a pressure sensor fault.

    • Hi James

      This is a very common fault and we now carry these units in stock on an exchange basis. This means you won’t need to send your unit in for repair, simply order our replacement part and send the old exchange part back to us. Alternatively we can offer a complete supply & fit service and still make it a fraction of the price you would expect to pay anywhere else!

      For pricing and more information, please email support or alternatively call us on 0844 847 9999.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • Hello I’m looking for a abs ecu for audi a6 partnr 8E0614111AH .
    do you have one? how much is it and do you send too Holland?
    thank you

    • Hi

      Thank you for your enquiry,

      We do have this in stock, please call for a quotation on 0844 847 9999 or alternatively please send an email via our Contact form.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • My daughters Golf 1.6 FSI already had an AbS light on when it was involved in an accident where the front drivers suspension was replaced, the garage handling the repair gave her the car back for a few days with two lights on, the original ABS fault light and the ESS steering wheel icon, and at one point an ESP light came on and went off again.

    The garage then took it back and charged her to repair the ABS fault, and the ESS fault , duringbwhichnInw told the steeringbwheel was removed and replaced.

    The car was returned with NO lights, but within one week the ESP light has come on the dash and the button on the console is lit constantly showing ESP is off.

    I have tried the re-calibration of the steering wheel angle sensor turning it right and left whilst the engine is on but not moving, then driving in Straight line, and switching off and I went through the ignition sequence again with no success, we still have the ESP light.

    I am puzzled how the garage could give her the car back with no lights , and within a few days the ESP light would appear?

    Thanks for any advice, particularly is it safe for her to drive.
    Jim

    • Hi Jim

      With the ESP light on, the ABS should be functional however the traction control system will be de-activated. You would need to check the fault codes to determine where the problem is but it sounds like the common Brake Pressure Sensor. This part can fail at any given time without any warning symptoms so although it does look like a bit too much of a coincidence it happening within a few days of receiving the car back, it is completely possible that the part failed of natural causes due to the design fault.

      We carry these parts in stock ready for a same-day dispatch because they’re so common and we sell on average 3-4 a day nationwide.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • Hi there,

    I’ve been having this problem on my Audi A2 for quite some time already, quite because of the expensive price to replace the part.

    Can you tell me what would be the price for replacing the unit for one of yours? I’m in Portugal.

    Thanks,
    Daniel

    • Hi Daniel

      Thank you for your enquiry,

      We can repair this pump but don’t carry stock for the Audi A2 so you would have to send your unit in for repair. Please email us for a price on repair & shipping to Portugal.

      Kindest Regards

      Jason
      Admin Team
      SINSPEED LTD

  • My abs and esp lights on dash stay on had unit tested by ecu testing derby, no faults BUT G201 CODE STILL COMES UP ANY IDEAS

    • Hi Richard

      Thanks for the enquiry,

      Depends on the exact vehicle – we’ve never had a G201 fault we can’t solve so I would be keen to know more on this one. Please call on 0844 847 9999 or alternatively send us an email with your full vehicle details (make/model/year) and your postal code for a customised quotation.

      Kind Regards

      Jason
      SINSPEED LTD

    • Hi Joel

      Thank you for contacting us,

      You will need to use VAGCOM or equivelant to get codes out of the ABS Brakes module, the faults won’t be stored in Engine ECU so it will say no stored codes if that is where you’re looking. We can offer a diagnosis service as well as a repair service. For details, please email us or call on 0844 847 9999.

      Kind Regards

      Jason
      SINSPEED LTD

  • Hi there, I have a customer with a mk 6 gold, getting the brake pressure sensor fault, what is the price for your fixed units, and what time can you turn them around?
    Peter

    • Hi Peter

      Thanks for the enquiry,

      Our sales team have replied to your enquiry via email as we do not list prices on our website. Please check your email inbox 🙂

      Kind Regards

      Jason
      SINSPEED LTD

  • I have a audi a3 20L tdi 53 plate mk2 and the esp light is on. I have had the code read and it says that it is sensor g201.how much would it be for a replacement fitted and I live near Manchester thanks.

    • Hi Scott

      Thank you for your enquiry,

      Someone will be in touch shortly with a quotation for you.

      Kind Regards

      Jason
      SINSPEED LTD

  • Hi,

    I have an Audi A4 2.0 Tdi 170 avant with the ESP light on. The following codes come 00493 ESP sensor unit (G419) 004 – No Signal/ Communication.

    The ABS light is not on

    Do you think its the ABS module?

    Tom

    • Hi Tom

      Thank you for your enquiry,

      The G419 ESP Sensor Unit is an external sensor which usually would be found fitted near the steering column. Ensure you have power going to this sensor as it may be a wiring fault but if wiring is okay, change the sensor and see if the fault will clear. When changing this sensor, you will need to perform adaptations using VAG-COM or equivelant. We offer a step-by-step tutorial on how to use VAG-COM to perform basic settings and adaptations for these sensors on our Sinspeed Forum but is only accessible for active forum users.

      I hope this helps.

      Kind Regards

      Jason
      Admin Team
      SINSPEED LTD

  • Hi
    I have a 2003 audi a3 2l fsi, my engine management light is on, and when I drive my abs and esp light comes on and stays on till I turn the car off. When I start it again they are not on but come on shortly after I start driving, could this be the same problem?
    Thanks

    • Hi Rob

      Thank you for your enquiry,

      No – this sounds like you have another issue on the vehicle. There are many sensors which work together and can all trigger this type of fault so it’s best to get it plugged in for a diagnostics and get the fault codes.

      Kind Regards

      Jason
      Admin Team
      SINSPEED LTD

      • I had a similar fault with a Chevrolet Kalos.I.E engine fault warning light, it was also affecting the zircon system and putting the LPG low warning beep on, had new heat sensor for the LPG fitted but it did not change a thing. I never cottoned on that although there is no water leak, my Kalos needs topping up more often than one would normally expect. Although the temperature guage read normal, which is what stopped me following that track. After a long while it became evident that the problems were all connected insufficient water in the header tank. Lo , and behold, all of those problems were cleared up overnight !

  • Hi,

    I have a 2007 Octavia VRS. yesterday the the steering wheel, the traction esp and tyre pressure warning lights came on.Then drove for a bit and the steering wheel warning light went out.
    Diagnostics give

    1) 01435 – Brake pressure sensor (G201)
    no or incorrect basic setting
    2) 00778 Steering angle sensor (G85)
    no or incorrect basic setting
    3) 01423 lateral acceleration sensor (G200)
    no or incorrect basic setting

    And last but not least

    4) 01135 interior monitoring sensors
    no signal/communication

    Would you be able to help with 1-3?

    Best Regards,

    Neil

    • Hi Neil

      Can definitely help with these problems, drive in.. give us 30-40 minutes and we’ll have it sorted for you 🙂

      Kind Regards

      Jason
      SINSPEED

  • I have just had a new ABS sensor fitted to my Kalos, cost £145, car is old now, so suspect others will go soon, can you beat that price ?

    • Hi

      If you can send us an email with the part number I can get a competitive price for you. Also the other faults you mentioned are not related to the article.. this is targeted more towards ABS faults but it is helpful information for anyone that may have had similar problems the ones you’ve experienced so thank you for sharing 🙂

      Kind Regards

      Jason
      SINSPEED

  • Hi we have an audi Quattro allroad 2003 model we have an issue with the abs warning lamp and ride height adjustment light as well as the esp staying on all the time then when drove for a while 2 out of the 3 go of and the height adjuster stays on when they are all on the engine revs up more hope you can give me some information at the start the brake lights would come on when we are not around the car I fixed this issue by replacing the brake switch. Thanks Mark

    • Hello Mark

      Thank you for your enquiry,

      Really the vehicle would need a diagnostics to read any fault codes coming up when the lights are on. Without this information we would be shooting in the dark.

      Kind Regards

      Jason
      SINSPEED

  • I have an Audi A6 2.4 and have an error in my ESP module that gives Brake pressure sensor 1 (G201). How can i fix it?

    • Hello Peter

      Thank you for your enquiry,

      We carry most brake pressure sensor units and ABS pumps / modules in stock. I would need your vehicle registration and part numbers from your ABS unit to match up the correct part for you and price you accordingly. Please come back to me with this information and I will assist you further.

      Kind Regards

      Jason
      SINSPEED

  • Hi there my wife’s car vw golf V6 4 m ESP lights on all the time Vcds is coming up with fault code 01423 lateral acceleration sensor G200 57-00. Electric circuit failure tryed a new G200 nope still light on the ESP button dose not work on the dash no light could this be the problem

    • Hi Stew

      Thanks for the enquiry,

      No it won’t be the G201 fault. If replacing the sensor didn’t fix it then you either have a wiring fault or insufficient voltage supply going to the sensor. Worst case the ABS module is defective by not supplying the voltage but this is repairable with a Lifetime warranty.

      Kind Regards

      Jason
      SINSPEED

  • Hello
    Seat leon 1.9 tdi (56)
    I have had my esp light on for a long time. I got told last year that it will not pass the mot this year. When a friend plugged it in. The fault I could find was with the brake position sensor failure. Could you please let me know the cost of the unit.
    Thank you.

    • Hi Anthony

      Thanks for the enquiry,

      I’ve sent you an email just now with some pricing to repair your existing unit and also a price for our replacement parts along with fitting if required.

      Kind Regards

      Jason
      SINSPEED

  • hi, i have a vw golf mk5 2006 2.0tdi 4motion and the light of esp is on for a year ago, vcds error code is G201, 01345
    how is problem and witch coast i repair it
    thanks

    • Hi Arban

      Thanks for the enquiry,

      We have the parts in stock for your vehicle model. I have sent you an email with pricing and further information.

      Kind Regards

      Jason
      SINSPEED

  • My Vw golf 4motion ABS and my ESP engin light come on ,
    And go off after a wile .i’v had two lamba sensor replace, I had the AA out to have a look, the code comes up bank 1 .bank 2
    Oxegen sensor came up, what can I do, can you repair it,
    Thank you
    Mr Morrison

    • Hello Mr Morrison

      We can most definitely repair the fault and don’t believe it will be related to the Lambda Sensor fault. That fault can cause the engine light to come on but will not be related as to why the ABS / ESP lights are coming on. We would need to diagnose the vehicle first to get the correct fault codes so I would recommend giving us a call and maybe we can book you in for a diagnostic session first to determine the exact fault.

      Kind Regards

      Jason
      SINSPEED

  • hi,i have a citroen c crosser with a faulty abs pump/ecu fault ,dealer says need replacement.
    part no 4670A340 and 06.2102-0934.4 these are also fitted to some Mitsubishi outlanders and peoguet 4007s.
    could you please give me a price for remanufactured part and for remanufacture of my part

    • Hello Paul

      Thanks for the enquiry,

      I know the unit, we see a lot of these and they also suffer from the common Brake Pressure Sensor fault. I do believe we have these in stock.

      I’ve sent a quick email over to you. Any questions, please come back to me.

      Kind Regards

      Jason
      SINSPEED

        • Hi Pat

          Thanks for the enquiry,

          I’ve sent you a quick email with some information and pricing regarding the repair and / or replacement of your Mitsubishi Outlander ASC unit.

          Kind Regards

          Jason
          SINSPEED

  • Hi, I have a seat altea which has the light illuminated permanently & the diagnostic says G201-01435 brake pressure sensor.
    Could you please give me a price?
    Many thanks

    • Hi Kirsty

      Thanks for the enquiry,

      We have modified units in stock to fix this fault. I have sent you a quick email with pricing and further information.

      Kind Regards

      Jason
      SINSPEED

  • Hi there,

    I have a ’09 Suzuki Grand Vitara with the ESP issue. Can you please send me the price for fixing this and procedure of sending faulty unit over to you.

    Thanks

    • Hello Shuglenn

      Thank you for your enquiry,

      I’ve sent you a quick email with full pricing and repair information.

      Kind Regards

      Jason
      SINSPEED

  • Hi I have a 07 Astra with a ESP issue would you be able to send me price for fixing this?and the procedure of sending the unit over please?
    Thanks

    • Hi John

      Thanks for the enquiry,

      We can definitely help, it’s a very common problem and I’ve sent you a quick email with full pricing information to repair the unit. You can also checkout this link for the Vauxhall Brake Pressure Sensor (ESP) Fault article which details the fault specific to Vauxhall with part numbers and fault codes that you can expect.

      I hope this helps.

      Kind Regards

      Jason
      SINSPEED

  • CAR BMW 3 SERIES 2006 Hydraulic unit pressure sensor fault in DSC unit.permanent fault.5E20

    Please send me quote

    Regards
    hassen

    • Hello Hassen

      Thanks for the enquiry,

      We’ve got replacement units on the shelf available for your vehicle. I’ve sent you a quick email with full information and pricing. We can send out a replacement unit or repair your own, whichever you prefer.

      Kind Regards

      Jason
      SINSPEED

    • Olá

      Obrigado por sua pergunta ,

      Enviei um e-mail com informações completas .

      Atenciosamente

      Jason
      SINSPEED
      (GOOGLE TRANSLATE)

  • Hi Barry
    My daughters 2007 Vauxhall Astra 1.9 CDTI has an ESP fault.Can you send me a price on a repair and how I would go about sending it to you.
    Cheers
    Ray

    • Hello Ray

      Thanks for the enquiry,

      We’ve sent you a quick email with full pricing and repair information.

      Kind Regards

      Jason
      SINSPEED

  • Hi There
    My car is a 56 plate Skoda 2.0 Vrs PD170
    The code for the unit is 1K0614517AF
    How much to replace / repair please.
    Many Thanks
    Eric

    • Hi Eric

      Thanks for the enquiry,

      We’ve got this unit in stock. I’ve sent you a quick email with prices to repair your own unit and replace with an exchange unit from our stock and additional fitting quotes if required.

      Kind Regards

      Jason
      SINSPEED

    • Hello Julieanne

      Thanks for the enquiry,

      We would need more specific information to give an accurate quote, however based on the common problems fond with the 2006 VW Golf ABS units we have sent you a quick email with an estimated quotation to repair your part. We also have exchange units available in stock if you urgently require replacing the unit.

      Kind Regards

      Jason
      SINSPEED

    • Hi Chris

      Thank you for your enquiry,

      We’ve sent you an email with full pricing and repair information for your Seat Leon FR brake pressure sensor fault.

      Kind Regards

      Jason
      SINSPEED

  • I have a ’10 Suzuki Grand Vitara with the ESP issue. Can you please send me the price for fixing this and procedure of sending faulty unit over to you.

    • Hi Rey

      Thanks for the enquiry,

      I’ve sent you an email just now with full pricing and repair information along with all details needed regarding the ESP fault on your Suzuki Grand Vitara. If you have any further enquiries, please respond to the email.

      Kind Regards

      Jason
      SINSPEED

  • Hello,

    I have faulty ABS module, ESP signal light is on, car is 2006 Ford Focus C-max and abs module part code is 10.0960-0119.3. What is the price for spare part?

    BG

    • Hello Egon

      Thanks for the enquiry,

      We have the parts in stock to rectify the issue you’re having with your Ford Focus C-Max ABS Pump and I’ve sent you an email with full pricing and repair information.

      Kind Regards

      Jason
      SINSPEED

  • Hi, We dropped our VW Eos 2007 car off to the local garage on Friday morning for them to fit 2 new front tyres. On collection – the ABS and ESP lights in yellow came up. The mechanics said this morning that it is a ‘ well it can happen suddenly’ comment! I am rather suspicious – should I be – they have quoted a VW ABS repair kit for £200?
    Thanks
    Tim

    • Hello Tim

      Thanks for the enquiry,

      If it is the brake pressure sensor fault (G201) then yes it can happen at any time and will not have been caused by the change of tyres. If it’s tyre pressure monitoring sensors or wheel speed sensors then this could be related to the changing of tyres and your fault code will tell you which side and which wheel is affected. Get the fault codes read and if it is a G201 pressure sensor fault then come back to us and we can quote you for the replacement part.

      Kind Regards

      Jason
      SINSPEED

      • Thank you for your advice . The car was transferred to an electronics diagnostic centre because after replacing the pump – the fault was still present. The whole problem was caused by the Pump only getting 6.3v input instead of 12v, this was a fusebox cover problem namely that a clip was resting on 2 fuses causing a short, one cause apparently could be the chassis flexing when tyres are changed. A design fault I say irrespective of the age of the vehicle but VW have said that what do you expect with a 7 year old car? It seems that my final bill will be nearer to £1,000 ! Just thought that others should be aware!

        • Hi Tim

          I’m very sorry to hear of the troubles you’ve had and the response you received from VW. I guess it’s hard to prove it being a design fault if it is that but glad you’ve solved the root cause of the failure. This will certainly help our customers investigate their own ABS issues as well and hopefully save others a lot of time and money.

          Kind Regards

          Jason
          SINSPEED

  • A4 S line 2.0 TDI 170 2009 abs / esp indicators illuminated , also parking brake symbol with line through it illuminates ,information panel says consult handbook , can your repair sort this out?
    If so what cost , I am mechanic fixing this car.

    • Hi Maurice

      Thanks for the enquiry,

      We’ve seen loads of these units and have been able to successfully test and repair them. I’ve sent you an email just now with full pricing and repair information along with turnaround times.

      Kind Regards

      Jason
      SINSPEED

  • I have a 2006 vw golf 1.4fsi currently showing fault code 01435 brake pressure sensor 1 (G201) also have ESP light on with an unresponding switch could you email me pricing please

    • Hi Kirstie

      Thanks for the enquiry,

      I’ve sent you an email with full pricing and information including our fitting service if required.

      Kind Regards

      Jason
      SINSPEED

  • Hi, I have a vw Passat 1.9tdi 2004. The esp light occasionally flickers which causes the car to jolt a little whilst driving, then the light goes solid and the jolting stops, it seems to occur when there is excessive weight or movement by people sitting on the back seats. Also when I approach a junction at slow speed and apply the brakes, it appears like the wheels are locking up, no abs light comes on but has done in the past. I have had this problem for about a year .

    • Hello Saf

      Thanks for the enquiry,

      I would first recommend checking for any stored / historical fault codes that might help identify where the fault is. If you get a code pointing to the Off-Side Rear wheel sensor then check the wheel speed sensor, ABS rings, wheel bearing and wiring for that sensor as the fault will most likely be there. If there are no codes stored then check all 4 wheels before suspecting the ABS pump.

      Kind Regards

      Jason
      SINSPEED

    • Hi Russ

      Thanks for your enquiry,

      Price varies depending on the vehicle so we need to know what vehicle you have and if you have a fault code to confirm it is the same fault we’ve mentioned that would help. We’ve sent you an email requesting further information.

      Kind Regards

      Jason
      SINSPEED

  • Hi,
    Two weeks ago I have noticed that the brake pedal on my MK Golf 5 2007 was very hard when pressed. Soon after the ABS/ESP lights has started lighting continuously. The ESP has no effect when pressed. I haven’t had the cod read yet and wonder if it is the same Brake Pressure Sensor you have explained above. Can you please send me the price for fixing this. Thanks,

    • Hi Svetlin

      Thanks for the enquiry,

      The Brake Pressure Sensor does not normally affect the braking pedal and does not normally make it go hard or soft. I would recommend having the codes read first.

      Kind Regards

      Jason
      SINSPEED

    • Hi Sorin

      Thanks for the enquiry,

      We’ve got replacement units on the shelf and can also rebuild your own unit. We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • hi there i have this problem as eps light is on and i had brake prusser sensor fult with code G201
    its for seat toledo 2005 please if you could let me knew how much it will cost me to fix the with you
    regards

    • Hi Hasan,

      Thanks for the enquiry,

      I’ve sent you an email with full pricing and information including our fitting service if required.

      Kind Regards

      Jason
      SINSPEED

  • 2001 VW Passat 1.8T SE – ABS light and brake warning light come on with warning 3 beeps on the alarm. Warning lights extinguish sometimes within 1 – 2 seconds and on occasion can remain on for 10 minutes. Have the following to DTC Nos. 01203 – Electrical connection between ABS and Instrument Cluster : open or Short to Ground; and 18014 Rough Road/ engine torque signal from ABS Electrical malfunction. Am I correct in thinking that this a fault with the ABS Pump Control module and that this may require a new unit or repair to the present unit. If it is repair then can you do this and at what cost!

    • Hello John,

      Thank you for your enquiry.

      I have sent over an email now with further information regarding your ABS enquiry.

      Kind Regards,

      Jason
      Sinspeed

  • Hi.
    I live in Norway.
    I have a Golf V 2007 mod
    Do I have two send in the ABS module, or do you have complete modules With external mount pressure switch?

    • Hello Svein,

      Thank you for your enquiry,

      I have sent over an email with pricing and further information regarding the repair of your VW Golf Brake Pressure Sensor.

      Kind Regards

      Jason
      Sinspeed

  • I’ve got a zafira that’s had this light on for years & only now has it failed it’s MOT because of it. It’s a 1.6 petrol 55 plate. Can you give me a price to fix please.

    • Hello Mark,

      Thank you for your enquiry, and many apologies for the delay in our response.

      An email has been sent to you now with pricing and further information regarding the repair of the ABS/ESP on your Vauxhall Zafira.

      Kind Regards,

      Jason
      Sinspeed

  • I’m in need of a replacement abs unit pleasy 😉 mines got the famous pressure fault
    Seat Leon Cupra r 2005
    Thanks Luke

    • Hello Luke,

      Thank you for your enquiry,

      I have just sent over an email now with pricing and further information regarding the repair of your Seat Leon Cupra ABS / EPS Module.

      Kind Regards,

      Jason
      Sinspeed

    • Hello Farrukh,

      Thank you for your enquiry,

      I have just sent over an email now for further information regarding the repair of the ABS Pump on your VW Touran.

      Kind Regards,

      Jason
      Sinspeed

  • hi I have a audi a3 2.0 tdi 56 reg with fault 01435 Brake Pressure Sensor my esp light is on
    is this a easy job for me to remove it and send it toyou for repair etc
    thank you

    • Hello Cheryl,

      Thank you for your enquiry,

      An email has just been sent over to you now with pricing and further information regarding the repair of the ABS / ESP Pump on your Audi A3.

      Kind Regards,

      Jason
      Sinspeed

  • Hi there, I’ve been informed that my abs unit is in its way out and have priced up a replacement and was wondering how much it would cost you to repair my unit. Thanks in advance Nick.

    • Hello Nick,

      Thank you for your enquiry,

      I have just sent over an email now with further information regarding an ABS Unit for your vehicle.

      Kind Regards,

      Jason
      Sinspeed

  • Hi i have a skoda fabia classic sdi and the ABS light is always on,the bloke from the garage said the problem was with the rear left wheel sensor,replaced this but the abs light is still on,will your product fix this problem,if so how much to buy,also the power steering light is mostly on,once in a while it goes off but very infrequently,any advice would be greatly recieved,thankyou,M.Ward.

    • Hello Michael,

      Thank you for your enquiry,

      I have just sent over an email with pricing and further information regarding the ABS / EPS Brake Pressure Sensor Failure on your Skoda Fabia.

      Kind Regards,

      Jason
      Sinspeed

    • Hi Chris

      The Mk4 Golf should have an external sensor already. I’ve sent you an email with pricing for our solution and a bit more information about it but if you could kindly respond with the part numbers from your ABS pump I can check and confirm whether or not it has an internal sensor. If the sensor is external it would be much cheaper for you and we can supply them if needed.

      Kind Regards

      Jason
      SINSPEED

  • I’ve got an Touran 2006 1.9TDI that needs your ABS Pump control module..
    Could you provide price inc. shipping to Ålesund, Norway..
    Is it easy for local (not VW garage) to replace/install ?
    When could unit be available ?

    Kind Regards
    Tor

    • Hi Tor

      Thanks for the enquiry,

      Shipping to Norway is not a problem and it is a very easy part for a mechanic to install. We have the units readily available in stock and I have sent you an email with full pricing and information. Any questions, please let me know.

      Kind Regards

      Jason
      SINSPEED

  • Hello!!
    I have a audi A6 2000 1.8 T , with fault 01435 Brake Pressure Sensor
    The ABS pump has number: 8E0 614 111 T
    Could you provide price inc. shipping to Kvinesdal, Norway?
    Do I need to send you my old ABS pump?
    Kind Regards: Joar Gusevik

    • Hi Joar

      Thanks for the enquiry,

      We’ve repaired hundreds of these and I’ve sent you an email just now with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Jomin,

      Thanks for the enquiry,

      We’ve repaired hundreds of these and I’ve sent you an email just now with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Leon

      Thank you for the question,

      The ABS brakes will still be active but your ESP functionality will be disabled whilst the ESP light is on. Get booked in for a diagnostic session to have the trouble codes read. They should point you in the direction of the fault and it could end up being an inexpensive sensor.

      Kind Regards

      Jason
      SINSPEED

  • Hello i have a citroen c2 the esp fault dnt go off since ive had new tyres the guy who fitted said he might of caught the sensor when greesing is this an easy fix ??

    • Hi Dean,

      Thanks for the enquiry,

      I’ve sent you an email with some further information regrding your query regarding your ESP fault with your Citroen C2.

      Kind Regards

      Jason
      SINSPEED

  • Hi
    i have Vw passat 2001 with esp, The brake pedal crackle while driving , ASR blocking wheel.
    fault code: 01542 – Yaw Rate Sensor (G202): Implausible Signal
    I changed to another G202,calibrated steering angle sensor

    still bad,Can you help?
    Thanks in advance

    • Hi Roland

      Thanks or the enquiry,

      There are some checks which must be performed on the vehicle first including a wiring continuity test from the Yaw Rate sensor to the ABS module. We have sent you an email with some further information and also some cost guidance if it does turn out to be an ABS Module failure.

      Kind Regards

      Jason
      SINSPEED

  • Hello

    How much for you to fit this fix? I live in Manchester could it be arranged for me to drive down and wait while it’s fixed.

    Thank you

    • Hi Lewis

      Thanks for your enquiry,

      On most vehicles it can be done same day whilst you wait because we carry a lot of replacement units in stock, however on some models stock is not always available and therefore we would have to rebuild your existing unit which can take 3-5 working days. I’ve sent you an email, if you can reply to that with your vehicle details I can then advise and quote accordingly.

      Kind Regards

      Jason
      SINSPEED

  • Hi recently brought a seat leon cupra r from a Garage had it a week and esp light came on took it back for them to scan it and its coming up with brake pressure sensor they seems to think they can just replace the sensor with a kit you can buy how much would you charge to fix this problem? Seat leon cupra r 2005

    • Hi Liam

      Thanks for the enquiry,

      We’ve sent you an email with pricing and information for the options available to you.

      Kind Regards

      Jason
      SINSPEED

  • Hi, got passat 2005 1.9 tdi, 110ps, and the 00810 – Sensor 1/2 for Brake Pressure error.
    The esp is on on Dashboard, and also the yellow P in circle striken through is on. How much is the modified abs pump with external pressure sensor? Please?

    • Hi Tom

      Thanks for the enquiry,

      I think we can possibly resolve the fault on your vehicle without having to change any parts. I have sent you an email with further information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Gavin

      Thanks for the enquiry,

      We’ve got replacement units in stock and have sent you an email with pricing and information including costs of our fitting service if required.

      Kind Regards

      Jason
      SINSPEED

  • I have a VW Passat 2001 Estate and need the ABS Electrical part repaired, how much Would it cost, is it Guaranteed, also how long would it take to get fixed and sent back to my Garage? Ignore ther capital T in my Email Address!

    • Hi Aaron

      Thanks for the enquiry,

      We have sent you an email with full pricing and information. All rebuilt ABS units are returned with a Lifetime warranty.

      Kind Regards

      Jason
      SINSPEED

  • I have a – 05 VW golf plus – 1.6 FSI with esp light on and diagnosed with brake pressure Sensor switch faulty. Please send price list and where I can get this fixed – I live in Burnham on sea – UK.

    • Hi Chris

      Thanks for the enquiry,

      We’ve got the replacement units in stock on the shelf and do offer a fitting service if required as well. I have sent you an email with full pricing and information for the services available to you.

      Kind Regards

      Jason
      SINSPEED

  • I have a problem with my golf 2004 1,6 trend FSI , abs lihgt Is on al the time , i live in Norway and i need to replace this unit or fix it. Can somone help me with this isue.

    • Hi Gaute

      Thanks for the enquiry,

      We’ve sent you an email with pricing and information but it bounced back with an error. Please send us an email so that we can respond with the information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Mark

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • The d is in lower case in my e mail. I have a peugot 206 the abs light keeps going off and on my garage are going to send it To. Recondition it but it is still so expensiive would it be possible to send me a price its a 55 year on the plate a 206 sport

    • Hi Clare

      Thanks for the enquiry, and many apologies for the delay in getting back to you.

      We have sent you an email with full pricing and information. All rebuilt ABS units are returned with a Lifetime warranty.

      Kind Regards

      Jason
      SINSPEED

    • Hi E,

      Thanks for the enquiry, and many apologies for the delay in getting back to you.

      We’ve just sent over an email now with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hello Konrad

      Thanks for the enquiry, and many apologies for the delay in getting back to you.

      We’ve got replacement units in stock and have sent you an email with pricing and information including costs of our fitting service if required.

      Kind Regards

      Jason
      SINSPEED

  • Hei.. Vw touran 2007- brake. Pressire sensor. I hve to send the pump or have a reparation kit? I M a handy man. Thanks

    • Hi Razvan,

      Thanks for the enquiry

      It’s a very common issue and one we can definitely get sorted for you. We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • SsangYong Kyron EX 2.0 TD
    ESP and HDC warning lights on constanty. I think its the sensors rather than the units.

    • Hi Paul

      Thanks for the enquiry,

      We’ve sent you an email with full pricing and information. Please do not hesitate to get back in touch with us if we can be of further assistance.

      Kind Regards

      Jason
      SINSPEED

  • hi, i have a mazda 6 st2 2007, it has a problem with the eSP & ABS , when i go more than 50 miles h the lights of the eSP & ABS Are turning on. these lights stay open until i turn off the car. when i turn the car on again these lights are close. does Anybody know what might the problem be or how can i fix it. thank you

    • Hello Denis,

      Thanks for your enquiry,

      We have sent over an email now with some further information regarding the fault you are experiencing, if you require any further assistance please do not hesitate to reply to the email.

      Kind Regards

      Jason
      SINSPEED

  • Hi I have got Golf plus 1.6 fsi 2006 model. I got it checked and its brakes pressure module PART NUMBER 1K0907379Q ECU 1K0614517M. Can you please provide me a quotation
    thanks

    • Hello R,

      Thank you for your enquiry,

      We have sent over an email now with pricing and further information. Please do not hesitate to contact us if you require any further information.

      Kind Regards

      Jason
      SINSPEED

  • Hi, Citroen c2 vts 2006. Have got ESP/ABS fault light on dashboard. Turns off once engine turned off and on again. It appears under heavy breaking. Do I need a new ABS pump.

    Thankyou

    • Hello Dan,

      Thanks for your enquiry,

      It’s a very common issue and one we can definitely get sorted for you. We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

    • Hi Christopher,

      Thanks for the enquiry

      It’s a very common issue and one we can definitely get sorted for you. We’ve sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  • Hi. I have a 2006 octavia vrs with the esp light on and error code 01435. Please could you send me a quote for your fix Including removal/ fitting if possible? Thanks.

    • Hi James,

      Thanks for the enquiry

      It’s a very common issue and one we can definitely get sorted for you. We’ve sent over an email now with full pricing and some further information.

      Kind Regards

      Jason
      SINSPEED

  • Jason I have a 2007 gt140 diesel golf showing brake pressure fault i see use do a replacement pump how much is it please to bt191qe northern ireland uk postcode

    • Hi Alfie,

      Thanks for the enquiry,

      We’ve sent you an email now with full pricing and information. Please do not hesitate to get back in touch with us if we can be of further assistance.

      Kind Regards

      Jason
      SINSPEED

  • 2009 Seat Altea XL with ABS and ESP illuminated. Diagnostics showed speed sensor failire. Replaced but still have lights illuminated. Can this be Fixed?

    • Hi John,

      Thanks for the enquiry and many apologies for the delay in our response.

      We’ve sent over an email now with full pricing and some further information.

      Kind Regards

      Jason
      SINSPEED

  • I have 2009 VW Jetta GLI 2.0 T , ABS brake module has gone out twice (2) , looking for a replacement that won’t keep failing on me! , P# 1KO.614.517.bE , my cost ? $$$$
    type:1k28w3 and can it be re=programmed to work in my vehicle ? and what do I need to make this happen?

    • Hello Arden,

      Thanks for your enquiry and many apologies for the delay in our response.

      We have sent over an email now with pricing and further information regarding the fault you are experiencing, if you require any further assistance please do not hesitate to reply to the email.

      Kind Regards

      Jason
      SINSPEED

  • Hi I have a vw Touran the traction control light is on abd the dianostic machine is Saying something about abs module but as far as im aware nothing about brake pressure although our brake pad light is on and when we had our tyres changed the other week the man said brake pads were fine its the brake pad sensor is broke

    • Hi Stevie,

      Thanks for the enquiry and many apologies for the delay in our response.

      We’ve sent you an email now with full pricing and information. If you require any further information, please reply to the email and we will be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

    • Hi Dave,

      Thanks for the enquiry,

      We’ve sent over an email now with full pricing and some further information.

      Kind Regards

      Jason
      SINSPEED

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact